Performance Improvement of Thermoelectric Air Cooler System by Using Variable-Pulse Current for Building Applications
Author:
Open Access
- 28 August 2021
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 13 (17) , 9682
Abstract
The thermoelectric air conditioning system (TE-AC) is a small, noiseless alternative to standard vapor compression refrigeration (VCR) systems. The cooling characteristics of a TE-AC system operating under two conditions, i.e., steady current and current pulses, are investigated in this study. This system consists of three thermoelectric modules, a heat sink, and an air circulation fan. The result shows that maximum temperature reduction in cooling side of TE-AC system was achieved at 6 A input current under steady state operation. The optimum performance of the TE-AC system under steady state operation depends upon the combined effect of the cooling load, Joule, Fourier, and Peltier heat. In TE-AC pulse operation, both current width and cooling load applied on the cold side of the thermoelectric module (TEMs) play an important role in achieving optimum cooling performance of the system. When normal input current operation (i.e., no current pulse) was compared to pulse-operated TE-AC system operation, it was found that pulse operation provides an additional average temperature reduction of 3–4 °C on the cold side of TEMs. Although on the hot side, it maintains a temperature in the range of 18 °C to 24 °C to reduce overshoot heat flux. The duration of operation is also important in determining pulse width and pulse amplitude. Minimum and overshoot peak temperature rises during each cycle for longer run operation. In the TE-AC system, the accumulated Joule heat during a current pulse frequently causes a temperature overshoot, which lasts much longer. As a result, the next current pulse was not released until the temperature of TE was restored to its initial value.Keywords
Funding Information
- Deanship of Scientific Research (DSR) at King Fahd University of Petroleum & Minerals (KFUPM) (SR191010)
This publication has 36 references indexed in Scilit:
- Enhancement of maximum temperature drop across thermoelectric cooler through two-stage design and transient supercooling effectApplied Energy, 2016
- An investigation on thermoelectric coolers operated with continuous current pulsesEnergy Conversion and Management, 2015
- Recent development and application of thermoelectric generator and coolerApplied Energy, 2015
- Pulsed Thermoelectric Cooling for Improved Suppression of a Germanium HotspotIEEE Transactions on Components, Packaging and Manufacturing Technology, 2013
- Characterization of a thermoelectric cooler based thermal management system under different operating conditionsApplied Thermal Engineering, 2013
- The transient behavior of Peltier junctions pulsed with supercoolingJournal of Applied Physics, 2012
- Numerical and experimental analysis of transient supercooling effect of voltage pulse on thermoelectric elementInternational Journal of Refrigeration, 2012
- Thermodynamic formulation of temperature–entropy diagram for the transient operation of a pulsed thermoelectric coolerInternational Journal of Heat and Mass Transfer, 2006
- Transient cooling of thermoelectric coolers and its applications for microdevicesEnergy Conversion and Management, 2005
- Supercooling of Peltier cooler using a current pulseJournal of Applied Physics, 2002