Experimental analysis of PEM fuel cell performance using lung channel design bipolar plate
- 15 October 2019
- journal article
- research article
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 16 (15) , 1591-1601
Abstract
Performance of a polymer electrolyte membrane fuel cell is appreciably improved by flow-field geometry. In recent literature, it has been observed that naturally inspired flow channel designs enhance the fuel-cell performance. The relevant examples are plant leaves and human lung structure. The high performance of these designs is uniform reactant distribution and better water management. In this study, the lung channel geometry of bipolar plate is used in the fuel cell for the supply of reactants. A fuel cell of 49 cm2 area with Nafion-117 membrane is assembled by incorporating the lung channel bipolar plate and tested on the programmable fuel-cell test station. The influence of various operating parameters like temperature, pressure, anode (A), and cathode (K) humidification temperatures and the back pressure on the performance of fuel cell is analyzed experimentally. From these experimental results, it is observed that the fuel-cell generates 25.62 W at 42.7 A current when it is operated at a temperature of 60°C, 1-bar pressure, A and K humidification temperatures are at 60°C and 50°C, respectively. The experimental results of lung channel are compared with that of triple serpentine flow channel. The fuel cell with lung channel generates around 34% more power than triple serpentine flow field.Keywords
This publication has 21 references indexed in Scilit:
- Design of a proton exchange membrane portable fuel cell system for the 1st international association for hydrogen energy design competitionInternational Journal of Hydrogen Energy, 2011
- Study of the effects of flow channel with non-uniform cross-sectional area on PEMFC species and heat transferInternational Journal of Heat and Mass Transfer, 2011
- Effect of flow field design on performances of high temperature PEM fuel cells: Experimental analysisInternational Journal of Hydrogen Energy, 2011
- Numerical analysis of the influence of the channel cross-section aspect ratio on the performance of a PEM fuel cell with serpentine flow field designInternational Journal of Hydrogen Energy, 2011
- Performance and cost of automotive fuel cell systems with ultra-low platinum loadingsJournal of Power Sources, 2011
- Effect of channel and rib width on transport phenomena within the cathode of a proton exchange membrane fuel cellInternational Journal of Hydrogen Energy, 2011
- A numerical study of flow crossover between adjacent flow channels in a proton exchange membrane fuel cell with serpentine flow fieldJournal of Power Sources, 2008
- Local transport phenomena and cell performance of PEM fuel cells with various serpentine flow field designsJournal of Power Sources, 2008
- Influence of Convection Through Gas-Diffusion Layers on Limiting Current in PEM FCs Using a Serpentine Flow FieldJournal of the Electrochemical Society, 2004
- A Gas Distributor Design for Proton‐Exchange‐Membrane Fuel CellsJournal of the Electrochemical Society, 1996