Producing a thin coloured film on stainless steels – a review. Part 1: electrochemical processes
Open Access
- 16 March 2022
- journal article
- review article
- Published by Taylor & Francis in Transactions of the IMF
- Vol. 100 (3) , 128-137
Abstract
Stainless steels are often used for decorative purposes, primarily in the architectural industry, but also in homeware and the automotive industry, among others. It is possible to impart colour on articles to enhance aesthetics without impairing the desirable properties of the stainless steel itself. The colour can be non-iridescent and created by the absorbance of light waves of all but a given wavelength, or iridescent and created by a phenomenon known as thin-film interference. Colouring methods have been categorised into three groups, electrochemical, non-electrochemical and laser colouring. Laser colouring can be utilised as either an electrochemical or non-electrochemical process. The colouring technique most widely adopted by industry is a 2-stage electrochemical process, known as the INCO process, which utilises chromic-sulphuric acid baths to produce a thin interference film on the stainless steel surface. Alternatives developed by investigators regularly cite the toxicity of hexavalent chromium as motivation for their work and use the INCO process as a benchmark. Authors claim that alternative techniques match or exceed many of the properties achieved through colouring using hexavalent chromium, however, none are yet widely adopted by industry for the purpose of colouring stainless steel. It is therefore important to consider each technique to understand why this is the case. Part 1 of this review discusses the electrochemical processes utilised to produce coloured films on stainless steel, and Part 2 discusses non-electrochemical and laser processes.Keywords
This publication has 33 references indexed in Scilit:
- Basic Physical Optics2009
- Characterization of interference thin films grown on stainless steel surface by alternate pulse current in a sulphochromic solutionMaterials Research, 2008
- An Environmentally Friendly and Practical Method for Obtaining Color on Stainless Steel by InterferenceJournal of the Electrochemical Society, 2005
- Chemical and electrochemical coloration of stainless steel and pitting corrosion resistance studiesJournal of the Brazilian Chemical Society, 2004
- Corrosion resistance of colored films grown on stainless steel by the alternating potential pulse methodElectrochimica Acta, 2003
- Colouring process for ferritic stainless steel alloy in NaNO3‐KNO3 eutectic meltMaterialwissenschaft und Werkstofftechnik, 1998
- Coloration of stainless steel at room temperature by triangular current scan methodElectrochimica Acta, 1996
- Current oscillations observed on a stainless steel electrode in Sulfuric Acid solutions with and without Chromic AcidElectrochimica Acta, 1995
- The Formation and Properties of a Thick Passive Film on Fe-Cr Alloys with Square Wave Potential Pulse PolarizationMaterials Science Forum, 1995
- Room Temperature‐Coloration of Stainless Steel by Alternating Potential Pulse MethodJournal of the Electrochemical Society, 1994