The influence of zinc content and sintering temperature on microstructure, hardness and corrosion potential of Mg-Zn-Ca alloy
Open Access
- 1 January 2025
- journal article
- Published by National Library of Serbia in Science of Sintering
- Vol. 58 (00) , 21
Abstract
Mg-Zn-Ca alloy, a material widely recognized for its potential as a biomaterial, has been the focus of our research. In this work, powder metallurgy was used to create three alloys with mass fractions: 89Mg-10Zn-1Ca, 93Mg-6Zn-1Ca, and 97Mg-2Zn-1Ca wt.%. Powders were mixed in the mentioned parts where magnesium served as the substrate. The compaction pressure applied to the sample was 200 MPa. The sintering process was then conducted at two temperature levels, 500?C and 600?C, in an argon gas environment. Hardness and microstructural observations were conducted on the samples. Electrochemical corrosion tests were performed using a potentiometer. Additionally, the potential of hydrogen (pH) value in simulated body fluid was evaluated. The results indicated that the alloy with the highest zinc content of 10% at a sintering temperature of 600?C exhibited the best potential as an implant material, showing the highest hardness test results and the lowest corrosion rate.Keywords
This publication has 29 references indexed in Scilit:
- Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: Corrosion behaviour, microhardness and biocompatibilityJournal of Magnesium and Alloys, 2021
- In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devicesBioactive Materials, 2021
- Using low-temperature sinterless powder method to develop exceptionally high amount of zinc containing Mg–Zn–Ca alloy and Mg–Zn–Ca/SiO2 nanocompositeJournal of Alloys and Compounds, 2021
- Mechanical properties and biodegradability of Mg–Zn–Ca alloys: homogenization heat treatment and hot rollingJournal of Materials Science: Materials in Medicine, 2020
- Development of Mg based biomaterial with improved mechanical and degradation properties using powder metallurgyJournal of Magnesium and Alloys, 2020
- Development of Mg-Alloy by Powder Metallurgy Method and Its CharacterizationPowder Metallurgy and Metal Ceramics, 2019
- In vitro degradation and mechanical integrity of Mg–Zn–Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process☆Acta Biomaterialia, 2010
- Research on an Mg–Zn alloy as a degradable biomaterialActa Biomaterialia, 2010
- Bio-corrosion characterization of Mg–Zn–X (X = Ca, Mn, Si) alloys for biomedical applicationsJournal of Materials Science: Materials in Medicine, 2009
- Magnesium and its alloys as orthopedic biomaterials: A reviewBiomaterials, 2006