A Comprehensive Review on the Nucleate/Convective Boiling of Low-GWP Refrigerants: Alternatives to HFC Refrigerants
Open Access
Abstract
This review presents the nucleate/convective boiling performance for a variety of important low global warming potential (LGWP) alternatives to commonly used high-global warming potential (GWP) refrigerants (such as R-134a, R404A, and R-410A, etc.). Efforts are stressed on the assessment of their evaporation pressure drop and heat transfer coefficient (HTC) characteristics. These alternatives include R-1234ze(Z), R-1234ze(E), R-1233zd (E), R-1234ze(E), R-410A, R-1234yf, and R-513A. The authors investigated the thermo-fluid properties within and outside a tube, mini-channel, micro-fin tube, and plate heat exchanger. The investigation of the numerical, experimental, and simulated results revealed that the evaporation pressure drop and HTC characteristics were dependent on a variety of variables. These factors include the working fluid’s thermodynamics and transport properties, the refrigerant’s mass flux, heat flux, saturation temperature, the vapor quality, the conditions and flow patterns, the orientation of the heating surface, and the geometry (shape, size, and surface area smooth/enhanced) of the heating surface. An expanded LGWP refrigerants, surfaces, and conditions database is needed. Mechanistic models may assist. These models can optimize boiling, anticipate heat transfer, and develop high-performance geometries.Keywords
Funding Information
- National Science and Technology Council, Taiwan (111-2221-E-A49-090-MY3)
- Bureau of Energy, Ministry of Economic Affairs, Taiwan (111-2221-E-A49-090-MY3)
This publication has 101 references indexed in Scilit:
- Hydrocarbon Refrigerant Vaporization Inside a Brazed Plate Heat ExchangerJournal of Heat Transfer, 2012
- Plate heat exchangers: Recent advancesRenewable and Sustainable Energy Reviews, 2012
- Heat transfer and pressure drop during HFC refrigerant saturated vapour condensation inside a brazed plate heat exchangerInternational Journal of Heat and Mass Transfer, 2010
- Flow boiling of R134a and ammonia in a plate heat exchangerInternational Journal of Heat and Mass Transfer, 2008
- Effect of Pin Tip Clearance on Flow and Heat Transfer at Low Reynolds NumbersJournal of Heat Transfer, 2008
- Convective boiling of pure and mixed refrigerants: An experimental study of the major parameters affecting heat transferInternational Journal of Heat and Mass Transfer, 2008
- Heat transfer and pressure drop during HFC refrigerant vaporisation inside a brazed plate heat exchangerInternational Journal of Heat and Mass Transfer, 2007
- Effect of tip clearance on the cooling performance of a microchannel heat sinkInternational Journal of Heat and Mass Transfer, 2004
- Experiments on the characteristics of evaporation of R410A in brazed plate heat exchangers with different geometric configurationsApplied Thermal Engineering, 2003
- Saturated flow boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchangerInternational Journal of Heat and Mass Transfer, 2002