Bio-Based White Eggshell as a Value-Added Filler in Poly(Lactic Acid) Composites
Open Access
- 5 July 2023
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 7 (7) , 278
Abstract
Based on its positive environmental impact, poly(lactic acid) (PLA) has been a gradual substitute for synthetic plastics used in diverse applications. The use of industrial limestone (ILS) as a filler in polymers can have advantages of changing the properties of pure polymers. Waste eggshells (WE) can be seen as an alternative filler to ILS as they are also a source of calcium carbonate. To assess the feasibility of both filler types and sizes, PLA composites were manufactured by injection molding with filler contents of 5, 10, and 20 wt.%. Tensile, flexural, and impact mechanical properties were evaluated in addition to water absorption. One-way analysis of variance (ANOVA) was performed to determine whether statistically significant differences among the measured mechanical properties existed. Scanning electron microscopy (SEM) was used to view the morphology of the fillers and fractured surfaces. The composite tensile strengths and flexural strengths performed the best when filler loadings were 5 wt.% and 10 wt.%, respectively, for both filler types. The tensile and flexural modulus both increased with filler loadings. The impact strength for the composites was obtained at a threshold level of 5 wt.% filler loadings for both filler types and slightly better for smaller particles sizes. ANOVA identified statistically significant differences for the mean mechanical property values evaluated. SEM showed the fractured surfaces of the PLA composites were different from the pure PLA indicating some transformation occurred to the matrix. The weight gains due to water absorption were observed to increase with increase in content of both filler types while the smaller particles had slightly higher water weight gains. Although the composites containing ILS fillers had somewhat enhanced mechanical properties over the WE-filled composites, the end application will dictate which filler type to use in PLA.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (RGPIN-2020-06701)
This publication has 53 references indexed in Scilit:
- Studies on Properties of Egg Shell and Fish Bone Powder Filled PolypropyleneAmerican Journal of Polymer Science, 2012
- Crucial Differences in the Hydrolytic Degradation between Industrial Polylactide and Laboratory-Scale Poly(L-lactide)ACS Applied Materials & Interfaces, 2012
- Polymer micro and nanocomposites: Structure, interactions, propertiesJournal of Industrial and Engineering Chemistry, 2008
- Theoretical and experimental determination of tensile properties of nanosized and micron‐sized CaCO3/PA66 compositesPolymer Composites, 2008
- Mechanical and Morphological Studies of Poly(propylene)‐Filled Eggshell CompositesMacromolecular Materials and Engineering, 2007
- Tensile, flow, and thermal properties of CaCO3‐filled LDPE/LLDPE compositesJournal of Applied Polymer Science, 2007
- Surfactant Chain Length and Tensile Properties of Calcium Carbonate‐Polyethylene CompositesMacromolecular Chemistry and Physics, 2007
- On enhanced impact strength of calcium carbonate-reinforced high-density polyethylene compositesMaterials Science and Engineering: A, 2005
- Some aspects of surface deformation and fracture of 5–20% calcium carbonate-reinforced polyethylene compositesMaterials Science and Engineering: A, 2004
- Tensile property and interfacial dewetting in the calcite filled HDPE, LDPE, and LLDPE compositesPolymer, 2002