Characteristics of an internal-mixing atomiser with supersonic configuration for metal powder production
Authors:
- 18 November 2015
- journal article
- research article
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 19 (sup8) , S8-740
Abstract
This paper describes the production of metal powder using an atomiser with internal-mixing mechanisms under supersonic configuration. The atomiser is designed with a convergent–divergent channel and a confinement section. The atomisation gas was first accelerated to supersonic speed through the annular convergent–divergent channel. It was then introduced to the confinement section and impinged onto the melt injected from the delivery tube. The interaction between the atomisation gas and the melt in the confinement section resulted in the atomisation of the melt. The confinement of the region downstream of the delivery tube is called the internal-mixing zone. Flow expansion was observed in the internal-mixing zone as the supersonic flow came out from the divergent section. The liquid phase was confined by the high-speed gas flow in the centre of the atomiser. The velocity of atomisation gas can further increase through the flow expansion and the high-velocity region of atomisation gas is extended. The resu...Keywords
This publication has 5 references indexed in Scilit:
- Improvements to close coupled gas atomisation nozzle for fine powder productionPowder Metallurgy, 2007
- Combination of Spray Forming and Metal Powder Productions by the Internal Mixing Atomizer with a SubstrateMaterials Science Forum, 2006
- Introduction2005
- A STUDY OF LIQUID METAL ATOMIZATION USING CLOSE-COUPLED NOZZLES, PART 1: GAS DYNAMIC BEHAVIORAtomization and Sprays, 2005
- Progress toward gas atomization processing with increased uniformity and controlMaterials Science and Engineering: A, 2002