Abstract
The paper presents the design and measurements of a low noise integrated circuit in a CMOS 130 nm for the readout of a hybrid pixel detector operating in a single photon counting mode. A core of IC contains a matrix of 128 $\times$ 256 square shaped pixels of 75 $\mu$ m pitch. Each readout pixel consists of a charge sensitive amplifier (CSA), a shaper, two discriminators, and two 14-bit counters. We present the novel CSA feedback circuitry with an effective resistance of 0.6 G $\Omega $ and sets of switches, which allows low noise operation and fast return to the CSA output baseline at the same time providing the possibility of operation with a higher flux of input pulses. The measured equivalent noise charge of IC (bump-bonded to silicon sensor) is only 44 e $^{-}$ rms at 15 $^{\circ}$ C, the offset spread is 5.5 e $^{-}$ rms and the energy resolution is FWHM $=$ 380 eV @ 8keV, which is currently the best result in single photon counting pixel detectors. The hybrid pixel detector can register up to 107 million photons/mm $^{2}$ per second, while the power consumption per single pixel is about 42 $\mu$ W.
Funding Information
  • National Science Centre, Poland (UMO-2017/27/B/ST7/01217)
  • “Excellence Initiative−Research University“ Program for the AGH University of Science and Technology, Poland

This publication has 34 references indexed in Scilit: