10F-3 Self-Focused ZnO Transducers for Ultrasonic Biomicroscopy
- 1 October 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 103 (10510117) , 945-948
Abstract
A simple fabrication technique was developed to produce self-focused high frequency single element transducers with sputtered zinc oxide (ZnO) crystal films. The novelty of this technique lies in that the ZnO film can be sputtered directly onto a curved substrate. Two transducers were fabricated by sputtering an 18 mum thick ZnO layer on 2 and 3 mm diameter aluminum rods with ends shaped and polished to produce an f# equal to one. The aluminum rod served a dual purpose as the backing layer and positive electrode for the resultant transducers. A single 4 mum Parylene polymer matching layer was deposited on the transducers after housing and interconnect. The pulse-echo response for the 2 mm aperture transducer was centered at 109 MHz with a -6 dB bandwidth of 43%. A 3 mm aperture transducer produced a 96 MHz echo response with a 52% bandwidth. The measured insertion loss for the 2 mm aperture was 45 dB and the 3 mm aperture was 42 dB. A wire phantom and adult zebrafish were imaged to show the capability of the transducers.Keywords
This publication has 6 references indexed in Scilit:
- Self-focused high frequency ultrasonic transducers based on ZnO piezoelectric filmsApplied Physics Letters, 2007
- Fabrication of MEMS ZnO dome-shaped-diaphragm transducers for high-frequency ultrasonic imagingJournal of Micromechanics and Microengineering, 2005
- Fabrication of focused poly(vinylidene fluoride-trifluoroethylene) P(VDF-TrFE) copolymer 40–50 MHz ultrasound transducers on curved surfacesJournal of Applied Physics, 2004
- Thin Film Piezoelectrics for MEMSJournal of Electroceramics, 2004
- Advances in ultrasound biomicroscopyUltrasound in Medicine & Biology, 2000
- The design of protection circuitry for high-frequency ultrasound imaging systemsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1991