Ultrasonic Guided Wave Damage Localization in Hole-Structural Bearing Crossbeam Based on Improved RAPID Algorithm
- 19 September 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-13
Abstract
The hole-structural bearing crossbeam plays an important role in high-speed trains. In the service process, however, the long-term fatigue load may lead to structural damage such as cracks, resulting in performance degradation and failure. Ultrasonic guided wave (GW) technology is one of the most effective damage localization methods in structural health monitoring (SHM), with a high damage sensitivity and wide monitoring range. To address the damage localization in bearing crossbeams, a modified reconstruction algorithm for probabilistic inspection of damage (RAPID) based on the corrected probability distribution function is proposed. First, the valid sensor paths affected by damage are obtained using damage index (DI) based on correlation analysis. Then, the positional relationships between valid paths and damage are classified based on the time of flight (TOF). Finally, the damage diagnostic image and localization are obtained by fusion imaging using the corresponding probability distribution functions and shape factors, depending on different types of the path. The effectiveness was verified by numerical simulation and experiment. By taking the crossbeam of the high-speed train as the research object, through the static simulation of the crossbeam stress distribution under load, the damaged hot-spots area is obtained, and the sensor network is designed. And then, the SHM experimental system is constructed to perform damage localization experiments. The localization absolute error was less than 8 mm. Experimental results show that the proposed method can effectively locate the damage position in the crossbeam and has better accuracy and reliability than the traditional RAPID algorithm.Keywords
Funding Information
- National Key Research and Development Project (2020YFE0204900)
- National Natural Science Foundation of China (62073193, 61903224)
- Key Research and Development Plan of Shandong Province (2021CXGC010204)
This publication has 44 references indexed in Scilit:
- Guided wave propagation in H-beam and probability-based damage localizationStructural Control and Health Monitoring, 2016
- An Improved Gaussian Mixture Model for Damage Propagation Monitoring of an Aircraft Wing Spar under Changing Structural Boundary ConditionsSensors, 2016
- Impact imaging of aircraft composite structure based on a model-independent spatial-wavenumber filterUltrasonics, 2016
- Efficient tool for designing 2D phased arrays in lamb waves imaging of isotropic structuresJournal of Intelligent Material Systems and Structures, 2014
- A guided wave approach for real-time health monitoring of high-speed train bogie frames2014
- In situ health monitoring for bogie systems of CRH380 train on Beijing–Shanghai high-speed railwayMechanical Systems and Signal Processing, 2014
- Probabilistic Damage Identification Based on Correlation Analysis Using Guided Wave Signals in Aluminum PlatesStructural Health Monitoring, 2009
- Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoringSmart Materials and Structures, 2007
- Advances in the development of built-in diagnostic system for filament wound composite structuresComposites Science and Technology, 2006
- Detection of cracks at rivet holes using guided wavesUltrasonics, 2002