Evaluation of specific total work of fracture in polypropylene/ethylene‐propylene diene monomer nanocomposites based on various graphene derivatives: Optimization by response surface methodology technique and correlation with microstructure properties
- 1 November 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (2) , 778-799
Abstract
This study presents an experimental design approach for optimization and prediction of specific total work of fracture (wf) in polypropylene/ethylene‐propylene diene monomer (EPDM) nanocomposites based on disparate graphene derivatives including multilayer graphene, few‐layer graphene and graphene oxide. Box–Behnken design and response surface methodology (RSM) were exploited at three levels and four factors to construct a predictive mathematical model for the value of wf. The model predicted that the maximum value of wf (136.7 J/mm2) is achieved by applying dynamically vulcanized system at EPDM content and few‐layer graphene content of 20 wt% and of 0.5 wt%, respectively. In addition, by observing the fracture surfaces of specimens, a direct correlation between RSM predictions and morphology of nanocomposites was established. In this regard, transmission electron microscopy and wide‐angle X‐ray diffraction analyses showed that by using few‐layer graphene, thanks to formation of an exfoliated structure, more energy for the failure of nanocomposites is required which substantiates the model predictions. Scanning electron microscopy observations depicted that the droplets diameter of homogeneous EPDM particle size plays a pivotal role in number of micro‐voids and nano‐voids, which consequently promotes the creation of fibril structure and eventually heightens nanocomposite resistance against the applied load. The optimum status of this phenomenon happens at 20 wt% of EPDM and as the model showed, the value of wf reaches the highest point at this EPDM content. Likewise, by applying dynamic vulcanization, as truly predicted by the model, the formation of multi fibrillar structure led to dissipation of extra energy in nanocomposites inducing a remarkable improvement in the value of wf.Keywords
This publication has 52 references indexed in Scilit:
- Synthesis, Characterization, and Tribological Behavior of Oleic Acid Capped Graphene OxideJournal of Nanomaterials, 2014
- A Comprehensive Review of Graphene Nanocomposites: Research Status and TrendsJournal of Nanomaterials, 2013
- Fracture study of modified TiO2 reinforced PP/EPDM composite: mechanical behavior and effect of compatibilizationInternational Journal of Plastics Technology, 2012
- Evaluation of fracture toughness of ABS polymers via the essential work of fracture (EWF) methodJournal of Materials Science, 2012
- Effect of repetitive processing on the mechanical properties and fracture toughness of dynamically vulcanized iPP/EPDM blendsJournal of Applied Polymer Science, 2010
- Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: A reviewProgress in Polymer Science, 2010
- Graphene/Polymer NanocompositesMacromolecules, 2010
- The influence of matrix viscosity and composition on the morphology, rheology, and mechanical properties of thermoplastic elastomer nanocomposites based on EPDM/PPPolymer Composites, 2008
- Thermoplastic Elastomers Based on PP/EPDM Blends by Dynamic VulcanizationRubber Chemistry and Technology, 2007
- Microstructure‐properties correlations in dynamically vulcanized nanocomposite thermoplastic elastomers based on PP/EPDMPolymer Engineering & Science, 2007