Demulsification Treatment of Spent Metalworking Fluids by Metal Cations: The Synergistic Effect and Efficiency Evaluation
Open Access
Abstract
In this paper, various metal ions were utilized for the demulsification of spent metalworking fluids discharged from an automobile parts workshop. Five types of metal ions, i.e., Fe3+, Al3+, Fe2+, Ca2+ and Mg2+, combined with coagulant were systematically evaluated, and the synergistic effect as well as the optimum operating conditions were studied. The results indicated that the Ca2+ as well Mg2+ possessed hardly efficiency for the demulsification, on the contrary, Fe2+ reduced the yield of the by-product sludge and lowered the SV30 ratio, and Al3+ boosted the CODCr removal. Furthermore, Fe3+ and Al3+ had a significant synergistic effect to achieve a better transmittance and a higher CODCr/SV30 ratio which revealed that more CODCr was removed, as well as less by-product sludge was generated. For a better demulsification of spent metalworking fluids, the optimum operating conditions were gathered as follows: the dosage of metal ions was 0.08 mol/L with Al3+:Fe3+ ratio was 1.5:1, the reaction pH was 6.00, the reaction time was 18.00 min and the temperature was 323.00 K. Based on this, the CODCr removal, the SV30 ratio and the transmittance and CODCr/SV30 ratio of the spent metalworking fluids were 80.21%, 40.00%, 95.20% and 128.33 mg/mL, respectively. This combined metal ion demulsification method possessed an advantageous minimization of spent metalworking fluids, which greatly benefited the automobile parts workshops in cutting down the operating cost in environmental protection.Keywords
Funding Information
- Key Research and Development Program (Major technical innovation projects) of Shandong Provence (2020CXGC011204)
- The Postgraduate Scholarship Program of China Scholarship Council, CSC 2020 (202000810011)
- Taodu Elite Program of Yixing City (CX201909C)
- Jiangsu provincial policy guidance program (International Science and technology cooperation) - key national industrial technology research and development cooperation projects (BZ2018033)
This publication has 28 references indexed in Scilit:
- Recent developments and performance review of metal working fluidsTribology International, 2017
- Coagulation performance and microstructural morphology of a novel magnetic composite coagulant for pre-treating landfill leachateInternational Journal of Environmental Science and Technology, 2017
- Characterization and coagulation behavior of polymeric aluminum ferric silicate for high-concentration oily wastewater treatmentChemical Engineering Research and Design, 2017
- Demulsification techniques of water-in-oil and oil-in-water emulsions in petroleum industrySeparation and Purification Technology, 2016
- Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A reviewRenewable and Sustainable Energy Reviews, 2016
- Ultrasonic oil recovery and salt removal from refinery tank bottom sludgeJournal of Environmental Science and Health, Part A, 2014
- Investigation into the mechanisms by which microwave heating enhances separation of water-in-oil emulsionsFuel, 2014
- Evaluation of calcium chloride for synergistic demulsification of super heavy oil wastewaterColloids and Surfaces A: Physicochemical and Engineering Aspects, 2013
- Significance of thermodynamic and physical characteristics on permeation of ions during membrane separation: Hydrated radius, hydration free energy and viscous effectsSeparation and Purification Technology, 2012
- Surface modification and characterization for dispersion stability of inorganic nanometer-scaled particles in liquid mediaScience and Technology of Advanced Materials, 2010