Measures to Improve Wide-Bandgap Cu(In,Ga)Se2 Solar Cells by Industry-Relevant In-Line Co-Evaporation
Open Access
Abstract
Chalcopyrite-based thin-film solar cells have great potential for various applications, such as top or bottom cells in tandem devices, in addition to their use as standard single-junction modules due to their tuneable bandgap energy. A bandgap energy Eg > 1.5 eV should be targeted to realize a wide-bandgap top cell, e.g., by increasing the [Ga]/([Ga] + [In]) (GGI) ratio in Cu(In,Ga)Se2 (CIGS) cells to the range of 0.7–1. A second approach is targeting the second theoretical efficiency maximum at a little lower Eg = 1.34 eV with a GGI around 0.6 for high-efficiency single-junction applications with reduced electrical losses. An industry-relevant (Ag,Cu)(In,Ga)Se2 (ACIGS) co-evaporation process for wide-bandgap cells fabricated with GGI ratios above 0.6, with moderate [Ag]/([Ag] + [Cu]) (AAC) ratios < 0.1 and in-line RbF-PDT, was established on molybdenum-coated soda-lime glass substrates. Both measures, Ag alloying and RbF-PDT, can increase power conversion efficiency (PCE) mainly due to improved open-circuit voltage (VOC). In addition, Ag addition can increase fill factor (FF), leading to an increase in the PCE for cells with GGI > 0.6 compared to Ag-free reference cells. (Zn,Mg)O, either with a [Mg]/([Mg] + [Zn]) ratio of 0.15 or 0.25, is a good option as high-resistive layer replacing the commonly used i-ZnO in combination with a CdS buffer. Our best ACIGS wide-bandgap solar cells with RbF-PDT and Zn0.85Mg0.15O (without anti-reflective coating (ARC)) from various experimental campaigns show a PCE of 12.7% (Eg = 1.50 eV), and with a slightly reduced Eg of 1.45 eV a PCE of 15.5%, with VOC of 933 mV (VOC deficit of 517 mV), and a good FF of 73.2%. In the case when the bandgap is significantly lowered to 1.34 eV (GGI = 0.61), to the second theoretical efficiency maximum, we achieved a PCE of 18.2% with ARC for an Ag-free CIGS cell with RbF-PDT. For this cell with a CdS/i-ZnO buffer system the VOC deficit is 480 mV, and the FF is 78.1%.Keywords
Funding Information
- German Federal Ministry for Economic Affairs and Energy (0324076A)
- German Federal Ministry for Economic Affairs and Climate Action (03EE1059A)
- European Commission (HORIZON-CL5-2021-D3-02)
This publication has 58 references indexed in Scilit:
- X‐Ray and Electron Spectroscopy of the CdS/(Ag,Cu)(In,Ga)Se2 Interface With RbF TreatmentAdvanced Materials Interfaces, 2025
- Achieving over 860 mV Open‐Circuit Voltage in Low‐Ag Wide‐Bandgap Cu(In,Ga)Se2 Solar Cells Through Ion Diffusion and Band Structure OptimizationAdvanced Functional Materials, 2025
- Effect of Ga Variation on the Bulk and Grain‐Boundary Properties of Cu(In,Ga)Se2 Absorbers in Thin‐Film Solar Cells and Their Impacts on Open‐Circuit Voltage LossesProgress in Photovoltaics: Research and Applications, 2024
- Role of Ag Addition on the Microscopic Material Properties of (Ag,Cu)(In,Ga)Se2 Absorbers and Their Effects on Losses in the Open‐Circuit Voltage of Corresponding DevicesProgress in Photovoltaics: Research and Applications, 2024
- VOC‐losses across the band gap: Insights from a high‐throughput inline process for CIGS solar cellsProgress in Photovoltaics: Research and Applications, 2023
- Enhanced Performance of Ternary CuGaSe2 Thin‐Film Photovoltaic Solar Cells and Photoelectrochemical Water Splitting Hydrogen Evolution with Modified p–n HeterointerfacesAdvanced Materials Interfaces, 2022
- Wide‐gap (Ag,Cu)(In,Ga)Se2 solar cells with different buffer materials—A path to a better heterojunctionProgress in Photovoltaics: Research and Applications, 2020
- Record 1.0 V open‐circuit voltage in wide band gap chalcopyrite solar cellsProgress in Photovoltaics: Research and Applications, 2017
- Wide bandgap Cu(In,Ga)Se2solar cells with improved energy conversion efficiencyProgress in Photovoltaics: Research and Applications, 2012
- A stacked chalcopyrite thin‐film tandem solar cell with 1.2 V open‐circuit voltageProgress in Photovoltaics: Research and Applications, 2003