Wolfram Witte
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Wolfram Witte has a total of 196 co-authors. Here are the top co-authors by number of shared publications:
- Dimitrios Hariskos
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW), Meitnerstraße 1, 70563 Stuttgart, Germany
27 shared publications - Stefan Paetel
Zentrum für Sonnenenergie‐ und Wasserstoff‐Forschung Baden‐Württemberg (ZSW) Stuttgart Germany
12 shared publications Michael Powalla
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW), Meitnerstraße 1, 70563 Stuttgart, Germany
11 shared publications- Rico Gutzler
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW), Meitnerstr. 1, 70563 Stuttgart, Germany
10 shared publications - Wolfram Hempel
Zentrum für Sonnenenergie‐ und Wasserstoff‐Forschung Baden‐Württemberg (ZSW) Stuttgart Germany
9 shared publications Dimitrios Hariskos
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW), Meitnerstr. 1, 70563 Stuttgart, Germany
8 shared publications
Latest Publications
- Open Access
- 23 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (27) , 9575-9580
Defect States in the Electronic Structure of Ga 2 O 3 Transparent Conductive Oxide Surfaces
Defect states are crucial in many electronic devices. Oxygen vacancies, for example, are common in transparent conductive oxides and can both be beneficial (e.g., as a dopant to enhance conductivity) as well as detrimental (e.g., leading to reduced device performance by recombination at interfaces). Using soft and hard X-ray photoelectron spectroscopy (PES and HAXPES) with excitation photon energies ranging from 0.1 to 6.3 keV, we study the electronic surface structure of differently processed Ga2O3 samples in a depth-resolved fashion. Specifically, we investigate a Ga2O3 thin film, as used in Cu-(In,Ga)-Se2-based thin-film solar cells, as well as a β-Ga2O3 single crystal before and after a defect-inducing Ar+-ion treatment. Spectra calculations based on density functional theory (DFT) are used to explain the PES and HAXPES valence band signatures as a function of the excitation photon energy. The β-Ga2O3 single crystal spectra can be well described by the DFT calculations. In contrast, the Ga2O3 thin film and Ar+-ion treated β-Ga2O3 show significant spectral broadening of the valence band features and additional spectral intensity close to the valence band maximum, which we assign to defect states. This additional intensity varies as a function of probing depth, suggesting that these defects are mostly localized at the surface. We also discuss the importance of DFT-based spectra calculations to verify the proper determination of valence band maxima using a linear extrapolation.
- 23 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (27) , 9575-9580
Open AccessDefect States in the Electronic Structure of Ga 2 O 3 Transparent Conductive Oxide Surfaces
Defect states are crucial in many electronic devices. Oxygen vacancies, for example, are common in transparent conductive oxides and can both be beneficial (e.g., as a dopant to enhance conductivity) as well as detrimental (e.g., leading to reduced device performance by recombination at interfaces). Using soft and hard X-ray photoelectron spectroscopy (PES and HAXPES) with excitation photon energies ranging from 0.1 to 6.3 keV, we study the electronic surface structure of differently processed Ga2O3 samples in a depth-resolved fashion. Specifically, we investigate a Ga2O3 thin film, as used in Cu-(In,Ga)-Se2-based thin-film solar cells, as well as a β-Ga2O3 single crystal before and after a defect-inducing Ar+-ion treatment. Spectra calculations based on density functional theory (DFT) are used to explain the PES and HAXPES valence band signatures as a function of the excitation photon energy. The β-Ga2O3 single crystal spectra can be well described by the DFT calculations. In contrast, the Ga2O3 thin film and Ar+-ion treated β-Ga2O3 show significant spectral broadening of the valence band features and additional spectral intensity close to the valence band maximum, which we assign to defect states. This additional intensity varies as a function of probing depth, suggesting that these defects are mostly localized at the surface. We also discuss the importance of DFT-based spectra calculations to verify the proper determination of valence band maxima using a linear extrapolation.
- Open Access
- 25 May 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (9) , 1146-1158
Near 13% Efficient Semitransparent Cu(In,Ga)S 2 Solar Cells With Band Gap of 1.6 eV on Transparent Back Contact
Wide‐gap Cu(In,Ga)S 2 solar cells with In 2 O 3 :Sn (ITO) as transparent back contact are evaluated for the application as top cells in tandem devices. The effect of Na on the solar cell performance is investigated by supplying additional Na by NaF co‐evaporation or exclusively by Na diffusion from glass. An efficiency of 12.7% is achieved for a semitransparent solar cell with a band gap of 1.6 eV, with sufficient Na diffusion from glass only, allowed by a thin ITO layer. Absorber grown with additional NaF co‐evaporation during Cu(In,Ga)S 2 growth on thicker ITO show a comparable efficiency of 12%. High‐temperature growth at = 630°C enhances overall absorber quality and results in wide‐gap absorbers, with photoluminescence quantum yield improved to 1.5 × 10 −5 , two orders of magnitude higher than absorber grown at low temperature. NaF co‐evaporation is effective in suppressing deep defects, thereby reducing non‐radiative recombination and enhancing photoluminescence quantum yield further. A GaO x interfacial layer is formed at the rear contact, likely contributing to the passivation of the back contact. With the presence of thick GaO x layer, current blocking effects are visible in the current–voltage curves. On the contrary, a thinner ITO tends to result in thinner GaO x layer and no current blocking is observed.
- 25 May 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (9) , 1146-1158
Open AccessNear 13% Efficient Semitransparent Cu(In,Ga)S 2 Solar Cells With Band Gap of 1.6 eV on Transparent Back Contact
Wide‐gap Cu(In,Ga)S 2 solar cells with In 2 O 3 :Sn (ITO) as transparent back contact are evaluated for the application as top cells in tandem devices. The effect of Na on the solar cell performance is investigated by supplying additional Na by NaF co‐evaporation or exclusively by Na diffusion from glass. An efficiency of 12.7% is achieved for a semitransparent solar cell with a band gap of 1.6 eV, with sufficient Na diffusion from glass only, allowed by a thin ITO layer. Absorber grown with additional NaF co‐evaporation during Cu(In,Ga)S 2 growth on thicker ITO show a comparable efficiency of 12%. High‐temperature growth at = 630°C enhances overall absorber quality and results in wide‐gap absorbers, with photoluminescence quantum yield improved to 1.5 × 10 −5 , two orders of magnitude higher than absorber grown at low temperature. NaF co‐evaporation is effective in suppressing deep defects, thereby reducing non‐radiative recombination and enhancing photoluminescence quantum yield further. A GaO x interfacial layer is formed at the rear contact, likely contributing to the passivation of the back contact. With the presence of thick GaO x layer, current blocking effects are visible in the current–voltage curves. On the contrary, a thinner ITO tends to result in thinner GaO x layer and no current blocking is observed.
- Open Access
Measures to Improve Wide-Bandgap Cu(In,Ga)Se2 Solar Cells by Industry-Relevant In-Line Co-Evaporation
Chalcopyrite-based thin-film solar cells have great potential for various applications, such as top or bottom cells in tandem devices, in addition to their use as standard single-junction modules due to their tuneable bandgap energy. A bandgap energy Eg > 1.5 eV should be targeted to realize a wide-bandgap top cell, e.g., by increasing the [Ga]/([Ga] + [In]) (GGI) ratio in Cu(In,Ga)Se2 (CIGS) cells to the range of 0.7–1. A second approach is targeting the second theoretical efficiency maximum at a little lower Eg = 1.34 eV with a GGI around 0.6 for high-efficiency single-junction applications with reduced electrical losses. An industry-relevant (Ag,Cu)(In,Ga)Se2 (ACIGS) co-evaporation process for wide-bandgap cells fabricated with GGI ratios above 0.6, with moderate [Ag]/([Ag] + [Cu]) (AAC) ratios < 0.1 and in-line RbF-PDT, was established on molybdenum-coated soda-lime glass substrates. Both measures, Ag alloying and RbF-PDT, can increase power conversion efficiency (PCE) mainly due to improved open-circuit voltage (VOC). In addition, Ag addition can increase fill factor (FF), leading to an increase in the PCE for cells with GGI > 0.6 compared to Ag-free reference cells. (Zn,Mg)O, either with a [Mg]/([Mg] + [Zn]) ratio of 0.15 or 0.25, is a good option as high-resistive layer replacing the commonly used i-ZnO in combination with a CdS buffer. Our best ACIGS wide-bandgap solar cells with RbF-PDT and Zn0.85Mg0.15O (without anti-reflective coating (ARC)) from various experimental campaigns show a PCE of 12.7% (Eg = 1.50 eV), and with a slightly reduced Eg of 1.45 eV a PCE of 15.5%, with VOC of 933 mV (VOC deficit of 517 mV), and a good FF of 73.2%. In the case when the bandgap is significantly lowered to 1.34 eV (GGI = 0.61), to the second theoretical efficiency maximum, we achieved a PCE of 18.2% with ARC for an Ag-free CIGS cell with RbF-PDT. For this cell with a CdS/i-ZnO buffer system the VOC deficit is 480 mV, and the FF is 78.1%.
Open AccessMeasures to Improve Wide-Bandgap Cu(In,Ga)Se2 Solar Cells by Industry-Relevant In-Line Co-Evaporation
Chalcopyrite-based thin-film solar cells have great potential for various applications, such as top or bottom cells in tandem devices, in addition to their use as standard single-junction modules due to their tuneable bandgap energy. A bandgap energy Eg > 1.5 eV should be targeted to realize a wide-bandgap top cell, e.g., by increasing the [Ga]/([Ga] + [In]) (GGI) ratio in Cu(In,Ga)Se2 (CIGS) cells to the range of 0.7–1. A second approach is targeting the second theoretical efficiency maximum at a little lower Eg = 1.34 eV with a GGI around 0.6 for high-efficiency single-junction applications with reduced electrical losses. An industry-relevant (Ag,Cu)(In,Ga)Se2 (ACIGS) co-evaporation process for wide-bandgap cells fabricated with GGI ratios above 0.6, with moderate [Ag]/([Ag] + [Cu]) (AAC) ratios < 0.1 and in-line RbF-PDT, was established on molybdenum-coated soda-lime glass substrates. Both measures, Ag alloying and RbF-PDT, can increase power conversion efficiency (PCE) mainly due to improved open-circuit voltage (VOC). In addition, Ag addition can increase fill factor (FF), leading to an increase in the PCE for cells with GGI > 0.6 compared to Ag-free reference cells. (Zn,Mg)O, either with a [Mg]/([Mg] + [Zn]) ratio of 0.15 or 0.25, is a good option as high-resistive layer replacing the commonly used i-ZnO in combination with a CdS buffer. Our best ACIGS wide-bandgap solar cells with RbF-PDT and Zn0.85Mg0.15O (without anti-reflective coating (ARC)) from various experimental campaigns show a PCE of 12.7% (Eg = 1.50 eV), and with a slightly reduced Eg of 1.45 eV a PCE of 15.5%, with VOC of 933 mV (VOC deficit of 517 mV), and a good FF of 73.2%. In the case when the bandgap is significantly lowered to 1.34 eV (GGI = 0.61), to the second theoretical efficiency maximum, we achieved a PCE of 18.2% with ARC for an Ag-free CIGS cell with RbF-PDT. For this cell with a CdS/i-ZnO buffer system the VOC deficit is 480 mV, and the FF is 78.1%.
- Open Access
Visually Transparent and Scalable Cu(In,Ga)Se 2 Solar Cells Through Spatial Segmentation
Semi‐transparent photovoltaics aim to integrate power generation into building windows without compromising visual neutrality. Yet, most approaches achieve transparency by thinning the absorber layer, which reduces efficiency and leads to transmission of tinted light. Spatial segmentation provides an alternative where transparency is set by the aperture‐area ratio, while the full absorber thickness and its photovoltaic quality can be preserved. We implement this concept in Cu(In,Ga)Se 2 thin‐film solar cells using a bottom‐up approach that defines sub‐visible micro‐stripes prior to deposition and supports the efficient use of absorber material. To demonstrate scalability, we fabricate and characterise a semi‐transparent mini‐module with a series interconnection along the segmented stripes. The mini‐module has 40% average visible transmittance and achieves 10.9% active‐area efficiency, resulting in a light‐utilisation efficiency of 2.2%, while retaining a colour‐neutral appearance. These results show that geometric segmentation can translate full‐thickness thin‐film absorbers into viable, visually non‐obtrusive photovoltaic windows, offering a practical route towards high‐performance building‐integrated photovoltaics.
Open AccessVisually Transparent and Scalable Cu(In,Ga)Se 2 Solar Cells Through Spatial Segmentation
Semi‐transparent photovoltaics aim to integrate power generation into building windows without compromising visual neutrality. Yet, most approaches achieve transparency by thinning the absorber layer, which reduces efficiency and leads to transmission of tinted light. Spatial segmentation provides an alternative where transparency is set by the aperture‐area ratio, while the full absorber thickness and its photovoltaic quality can be preserved. We implement this concept in Cu(In,Ga)Se 2 thin‐film solar cells using a bottom‐up approach that defines sub‐visible micro‐stripes prior to deposition and supports the efficient use of absorber material. To demonstrate scalability, we fabricate and characterise a semi‐transparent mini‐module with a series interconnection along the segmented stripes. The mini‐module has 40% average visible transmittance and achieves 10.9% active‐area efficiency, resulting in a light‐utilisation efficiency of 2.2%, while retaining a colour‐neutral appearance. These results show that geometric segmentation can translate full‐thickness thin‐film absorbers into viable, visually non‐obtrusive photovoltaic windows, offering a practical route towards high‐performance building‐integrated photovoltaics.
- Open Access
- 22 March 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (7) , 942-956
Silver‐Alloyed Wide‐Bandgap (Ag,Cu)(In,Ga)S 2 Thin‐Film Solar Cells With 15.5% Efficiency
Sulfide chalcopyrite Cu(In,Ga)S 2 (CIGS) is a wide‐bandgap semiconductor suitable for the top cell of a tandem solar device. Here, we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S 2 (ACIGS) absorbers. We report the Ag alloying effect on compositional, structural, and optoelectronic properties of absorbers. We demonstrate suppressed bulk recombination and improved carrier lifetime in ACIGS, as a result of improved grain size, porosity reduction, and defect passivation. We also show that Ag alloying flattens the Ga gradient. Consideration of this impact of Ag will be necessary in future engineering of the Ga profile to maximize charge carrier collection and avoid interface recombination. Exploiting the beneficial effects of Ag alloying, we report a wide‐bandgap (1.58 eV) ACIGS solar cell with a high power conversion efficiency of 15.5% and a large open‐circuit voltage ( V OC ) of 948 mV, improving on the reference pure CIGS solar cell, with an 11.2% efficiency and an 821 mV V OC . Ag alloying is a useful route to further increase the efficiency of CIGS solar cells and future tandem devices.
- 22 March 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (7) , 942-956
Open AccessSilver‐Alloyed Wide‐Bandgap (Ag,Cu)(In,Ga)S 2 Thin‐Film Solar Cells With 15.5% Efficiency
Sulfide chalcopyrite Cu(In,Ga)S 2 (CIGS) is a wide‐bandgap semiconductor suitable for the top cell of a tandem solar device. Here, we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S 2 (ACIGS) absorbers. We report the Ag alloying effect on compositional, structural, and optoelectronic properties of absorbers. We demonstrate suppressed bulk recombination and improved carrier lifetime in ACIGS, as a result of improved grain size, porosity reduction, and defect passivation. We also show that Ag alloying flattens the Ga gradient. Consideration of this impact of Ag will be necessary in future engineering of the Ga profile to maximize charge carrier collection and avoid interface recombination. Exploiting the beneficial effects of Ag alloying, we report a wide‐bandgap (1.58 eV) ACIGS solar cell with a high power conversion efficiency of 15.5% and a large open‐circuit voltage ( V OC ) of 948 mV, improving on the reference pure CIGS solar cell, with an 11.2% efficiency and an 821 mV V OC . Ag alloying is a useful route to further increase the efficiency of CIGS solar cells and future tandem devices.
- Open Access
- 27 February 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (2) , 479-490
Effect of RbF post-deposition treatment on open-circuit voltage in wide-gap (Ag,Cu)(In,Ga)Se 2 solar cells
Wide-gap ACIGS solar cells usually suffer from large voltage losses. Optimizing the CdS buffer and increasing RbF treatment suppresses these losses, enabling voltages above 1 V.
- 27 February 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
- Vol. 2 (2) , 479-490
Open AccessEffect of RbF post-deposition treatment on open-circuit voltage in wide-gap (Ag,Cu)(In,Ga)Se 2 solar cells
Wide-gap ACIGS solar cells usually suffer from large voltage losses. Optimizing the CdS buffer and increasing RbF treatment suppresses these losses, enabling voltages above 1 V.
- Open Access
- 2 January 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (5) , 567-588
Progress Toward Efficient Wide‐Gap Cu(In,Ga)(S,Se) 2 Thin‐Film Solar Cells
In this paper, wide‐gap Cu(In,Ga)(S,Se) 2 thin‐film solar cells are studied in view of their performance, limitations, and opportunities for further optimization. To this end, a wide variety of properties is investigated. This includes the role of gallium gradients, grain size effects, electronic properties, doping metastabilities, and minority carrier lifetime. Particular emphasis is placed on the impact of alkali atoms. A comparison of surface, interface, and grain boundary chemistry shows systematic atomic accumulation and depletion effects. This leads to electronic modifications in the grain boundary regions of the absorber. Heavy alkali treatments also influence the device properties, giving a clear boost of open‐circuit voltage. By the combination of different experimental results, this positive open‐circuit voltage effect has been explained in terms of reduction of interface recombination. The latter effects are discussed in view of a possible alkali–indium–selenium bond formation at the interface between the absorber and the buffer layer. The properties of a 14.2%‐efficient Cu(In,Ga)Se 2 ‐based device with [Ga]/([Ga] + [In]) = 0.8 and a wide optical band gap of 1.48 eV are investigated, also in view of further opportunities for improvement.
- 2 January 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (5) , 567-588
Open AccessProgress Toward Efficient Wide‐Gap Cu(In,Ga)(S,Se) 2 Thin‐Film Solar Cells
In this paper, wide‐gap Cu(In,Ga)(S,Se) 2 thin‐film solar cells are studied in view of their performance, limitations, and opportunities for further optimization. To this end, a wide variety of properties is investigated. This includes the role of gallium gradients, grain size effects, electronic properties, doping metastabilities, and minority carrier lifetime. Particular emphasis is placed on the impact of alkali atoms. A comparison of surface, interface, and grain boundary chemistry shows systematic atomic accumulation and depletion effects. This leads to electronic modifications in the grain boundary regions of the absorber. Heavy alkali treatments also influence the device properties, giving a clear boost of open‐circuit voltage. By the combination of different experimental results, this positive open‐circuit voltage effect has been explained in terms of reduction of interface recombination. The latter effects are discussed in view of a possible alkali–indium–selenium bond formation at the interface between the absorber and the buffer layer. The properties of a 14.2%‐efficient Cu(In,Ga)Se 2 ‐based device with [Ga]/([Ga] + [In]) = 0.8 and a wide optical band gap of 1.48 eV are investigated, also in view of further opportunities for improvement.
- Open Access
- 10 December 2025
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (4) , 439-452
Sodium Induced Beneficial Effects in Wide Bandgap Cu(In,Ga)S 2 Solar Cell With 15.7% Efficiency
This study underscores the pivotal role of sodium (Na) supply in optimizing the optoelectronic properties of wide bandgap (~1.6 eV) Cu(In,Ga)S 2 (CIGS) thin‐film absorbers for high‐efficiency solar cells. Our findings demonstrate that the synergistic use of Na from the glass substrate, in conjunction with in situ sodium fluoride (NaF) co‐evaporation, significantly enhances the structural and optoelectronic properties of the CIGS. CIGS grown under either Na‐deficient or excess conditions exhibit inferior microstructural and optoelectronic properties, whereas an optimal Na supply leads to enhanced photovoltaic performance. Optimal Na incorporation minimizes vertical gallium fluctuations and improves the grain size and crystallinity. An absolute 1 sun calibrated photoluminescence (PL) measurement reveals a substantial suppression of bulk defects and a reduction in non‐radiative losses, resulting in a high quasi‐Fermi level splitting (Δ E F ) of 1.07 eV, 93 meV higher than in Na‐deficient CIGS with the same bandgap. Optimal Na supply further increases excited carrier decay time, as revealed from time‐resolved PL, and hole doping density. Cross‐sectional hyperspectral cathodoluminescence mapping reveals that optimal Na supply significantly reduces defect density near the surface, thereby effectively translating Δ E F to open‐circuit voltage ( V OC ). As a result, a champion wide bandgap CIGS solar cell with a cadmium‐free ZnSnO x buffer layer achieved an impressive V OC of 971 mV and an active area power conversion efficiency of 15.7%, highlighting its potential for advancing tandem photovoltaic technologies with a stable inorganic top cell.
- 10 December 2025
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (4) , 439-452
Open AccessSodium Induced Beneficial Effects in Wide Bandgap Cu(In,Ga)S 2 Solar Cell With 15.7% Efficiency
This study underscores the pivotal role of sodium (Na) supply in optimizing the optoelectronic properties of wide bandgap (~1.6 eV) Cu(In,Ga)S 2 (CIGS) thin‐film absorbers for high‐efficiency solar cells. Our findings demonstrate that the synergistic use of Na from the glass substrate, in conjunction with in situ sodium fluoride (NaF) co‐evaporation, significantly enhances the structural and optoelectronic properties of the CIGS. CIGS grown under either Na‐deficient or excess conditions exhibit inferior microstructural and optoelectronic properties, whereas an optimal Na supply leads to enhanced photovoltaic performance. Optimal Na incorporation minimizes vertical gallium fluctuations and improves the grain size and crystallinity. An absolute 1 sun calibrated photoluminescence (PL) measurement reveals a substantial suppression of bulk defects and a reduction in non‐radiative losses, resulting in a high quasi‐Fermi level splitting (Δ E F ) of 1.07 eV, 93 meV higher than in Na‐deficient CIGS with the same bandgap. Optimal Na supply further increases excited carrier decay time, as revealed from time‐resolved PL, and hole doping density. Cross‐sectional hyperspectral cathodoluminescence mapping reveals that optimal Na supply significantly reduces defect density near the surface, thereby effectively translating Δ E F to open‐circuit voltage ( V OC ). As a result, a champion wide bandgap CIGS solar cell with a cadmium‐free ZnSnO x buffer layer achieved an impressive V OC of 971 mV and an active area power conversion efficiency of 15.7%, highlighting its potential for advancing tandem photovoltaic technologies with a stable inorganic top cell.
- Open Access
- 5 December 2025
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 015010
Role of light and heavy alkalis in Cu(In,Ga)Se 2 absorbers
In this work, we investigate the distribution of single- and co-doped alkali elements—sodium (Na), potassium (K), and rubidium (Rb)—within the bulk and grain boundaries (GBs) of Cu(In,Ga)Se ₂ (CIGSe) thin-film solar cells, and examine their electronic impact on device efficiency. Atomically resolved analysis using atom probe tomography reveals pronounced compositional fluctuations of both matrix and dopant elements between GBs and the bulk. We propose mechanisms governing the copper and indium (In) distribution by classifying Na as a light alkali element, Rb as a heavy alkali, and K as an intermediate case. Notably, a correlation is observed between alkali concentration and In enrichment at the GBs, which is attributed to donor-like defect state formation. These variations effectively impact the local electronic structure, with Na and K segregation reducing the n-type character of GBs, while Rb accumulation enhances it. Our findings, supported by density functional theory calculations, provide fundamental insights into the role of alkali metal dopants in tuning GB characteristics, offering guidance for optimized alkali insertion in CIGSe solar cells.
- 5 December 2025
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 015010
Open AccessRole of light and heavy alkalis in Cu(In,Ga)Se 2 absorbers
In this work, we investigate the distribution of single- and co-doped alkali elements—sodium (Na), potassium (K), and rubidium (Rb)—within the bulk and grain boundaries (GBs) of Cu(In,Ga)Se ₂ (CIGSe) thin-film solar cells, and examine their electronic impact on device efficiency. Atomically resolved analysis using atom probe tomography reveals pronounced compositional fluctuations of both matrix and dopant elements between GBs and the bulk. We propose mechanisms governing the copper and indium (In) distribution by classifying Na as a light alkali element, Rb as a heavy alkali, and K as an intermediate case. Notably, a correlation is observed between alkali concentration and In enrichment at the GBs, which is attributed to donor-like defect state formation. These variations effectively impact the local electronic structure, with Na and K segregation reducing the n-type character of GBs, while Rb accumulation enhances it. Our findings, supported by density functional theory calculations, provide fundamental insights into the role of alkali metal dopants in tuning GB characteristics, offering guidance for optimized alkali insertion in CIGSe solar cells.
Impact of CIGS Absorber and Sputtered InxSy:Na Buffer Composition on Solar Cell Performance
We report on sodium containing indium sulfide (InxSy:Na) buffer layer in combination with a Cu(In,Ga)Se2 (CIGS) absorber and investigate the mutual interaction and influence of them on the thin‐film solar cell device performance. We examine a variety of absorber layers including CIGS with RbF post‐deposition treatment (PDT), CIGS without PDT, and Ag‐alloyed CIGS without PDT, each with three different copper concentrations. All absorber layers are prepared by in‐line coevaporation of the elements using a multistage industrially relevant process. The InxSy:Na buffer layers are deposited by magnetron sputtering from three different indium sulfide targets containing 0 mol%, 2 mol%, and 10 mol% NaF.Devices in which the InxSy:Na layer is combined with CIGS with RbF‐PDT have the highest power conversion efficiencies. The presence of sodium in InxSy can contribute to a higher cell efficiency depending on the quality of the absorber used. Sodium likely has a positive effect if the alkali doping in the absorber is insufficient and can be compensated by the sodium supplied from the buffer. We demonstrate cell efficiencies up to 19.1% with a sodium‐free In2S3 buffer combined with a high‐quality RbF‐PDT CIGS absorber with a comparably high copper content.
Impact of CIGS Absorber and Sputtered InxSy:Na Buffer Composition on Solar Cell Performance
We report on sodium containing indium sulfide (InxSy:Na) buffer layer in combination with a Cu(In,Ga)Se2 (CIGS) absorber and investigate the mutual interaction and influence of them on the thin‐film solar cell device performance. We examine a variety of absorber layers including CIGS with RbF post‐deposition treatment (PDT), CIGS without PDT, and Ag‐alloyed CIGS without PDT, each with three different copper concentrations. All absorber layers are prepared by in‐line coevaporation of the elements using a multistage industrially relevant process. The InxSy:Na buffer layers are deposited by magnetron sputtering from three different indium sulfide targets containing 0 mol%, 2 mol%, and 10 mol% NaF.Devices in which the InxSy:Na layer is combined with CIGS with RbF‐PDT have the highest power conversion efficiencies. The presence of sodium in InxSy can contribute to a higher cell efficiency depending on the quality of the absorber used. Sodium likely has a positive effect if the alkali doping in the absorber is insufficient and can be compensated by the sodium supplied from the buffer. We demonstrate cell efficiencies up to 19.1% with a sodium‐free In2S3 buffer combined with a high‐quality RbF‐PDT CIGS absorber with a comparably high copper content.