A Cascaded Eccentric Hole Fiber Sensor With Dumbbell-Shaped Structure for Large-Range Torsion Measurement
- 11 July 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (16) , 18234-18241
Abstract
A cascaded eccentric hole fiber (EHF) sensor with dumbbell-shaped structure for large-range torsion measurement is proposed and prepared. It is consisting of an EHF and two sections of single mode fiber (SMF) which are made into spheres by electric discharge. The main sensing structure is SMF sphere-EHF-SMF sphere. In the first sphere structure and EHF fusion point position, the appearance of mode-field mismatch and refractive index perturbation, the non-circular symmetric (NS) higher-order mode (HM) is created, the effective refractive index (ERI) difference between the HM and the fundamental mode (FM) is modulated by the torsion effect during the transmission process, and then the HM interferes with the FM at the second sphere structure. Experimental results show a maximum sensitivity of 0.759 nm/(rad/m) where the sensor undergoes a torsional change from 0 to ±720°. The blue shift occurs in the torsional range of 0 to ±4π rad/m and ±8π to ±12π rad/m, and a red shift in the range of ±4π to ±8π rad/m and ±12π to ±16π rad/m. The periodic shift phenomenon enables the sensor torsion range to be monitored. In addition, the axial strain has very small impact on the results.Keywords
Funding Information
- Hebei Education Department through the Science and Technology Project (ZD2022108)
- Natural Science Foundation of Hebei Province (F2021203045, F2021203058)
- Hebei Province Science and Technology Support Program (216Z1702G, 216Z1706G, 226Z1702G, 205A3901D)
This publication has 24 references indexed in Scilit:
- Simultaneous measurement of refractive index, strain and temperature using a tapered structure based on SMFOptics Communications, 2018
- Directional torsion and temperature discrimination based on a multicore fiber with a helical structureOptics Express, 2018
- Quasi-Distributed Optical Fiber Sensor for Liquid-Level MeasurementIEEE Photonics Journal, 2017
- Symmetric and Asymmetric Core-Offset Mach–Zehnder Interferometer Torsion SensorsIEEE Photonics Technology Letters, 2017
- A Stretchable and Highly Sensitive Graphene‐Based Fiber for Sensing Tensile Strain, Bending, and TorsionAdvanced Materials, 2015
- A Hybrid Multimode Interference Structure-Based Refractive Index and Temperature Fiber SensorIEEE Sensors Journal, 2015
- Hierarchically buckled sheath-core fibers for superelastic electronics, sensors, and musclesScience, 2015
- Torsion sensing setup based on a three beam path Mach–Zehnder interferometerMicrowave and Optical Technology Letters, 2015
- High-Sensitivity Displacement Sensor Based on a Bent Fiber Mach–Zehnder InterferometerIEEE Photonics Technology Letters, 2013
- Torsion sensing with a fiber ring laser incorporating a pair of rotary long-period fiber gratingsOptics Communications, 2011