Digital image-based performance evaluation of GCL-sand interfaces under repeated shearing
- 1 April 2024
- journal article
- research article
- Published by Emerald Publishing in Geosynthetics International
- Vol. 31 (2) , 166-186
Abstract
Inadequate shear strength mobilization at the interfaces results in translational failures in Geosynthetic Clay Liners (GCL). Periodic addition of solid waste into the landfill causes additional normal and shear stresses in GCLs. The mechanical response of GCLs and fibre strength are highly time-dependent. Hence the interface shear resistance reduces under the application of repeated shear cycles. To simulate these conditions, a repeated interface shearing test was conceptualized in this study. A natural river sand and a manufactured sand of identical gradation were used in experiments. Each GCL-sand interface was subjected to eight cycles of shearing in dry and hydrated conditions under three different static normal stresses. Results showed that the variation of the peak interface shear stress has different phases, governed by different mechanisms. Digital image analysis of tested GCL surfaces after each shearing cycle provided important clues for this response. Entrapment of sand particles into GCL surfaces is beneficial initially because of increased friction at the interface and this benefit is more pronounced in the case of manufactured sand, due to the irregular shape of particles. Quantification of sand particle entrapment and surface changes to GCL helped in understanding these micro-level interaction mechanisms.Keywords
This publication has 32 references indexed in Scilit:
- Shear strength of geosynthetic composite systems for design of landfill liner and cover slopesGeotextiles and Geomembranes, 2011
- Interface shear strength of geosynthetics: Evaluation and analysis of inclined plane testsGeotextiles and Geomembranes, 2009
- Back-analysis of a PVC geomembrane-lined pond failureGeosynthetics International, 2008
- Investigation on failure of a geosynthetic lined reservoirGeotextiles and Geomembranes, 2008
- Evaluation of interface shear strength of composite liner system and stability analysis for a landfill lining system in ThailandGeotextiles and Geomembranes, 2006
- Internal and interface shear strengths of unreinforced and needle-punched geosynthetic clay linersGeosynthetics International, 2004
- Use of the inclined plane test in measuring geosynthetic interface friction relationshipGeosynthetics International, 2003
- Effect of GCL and subgrade type on internal erosion in GCLs under high gradientsGeotextiles and Geomembranes, 2003
- Creep testing and data extrapolation of reinforced GCLsGeotextiles and Geomembranes, 2001
- Short-Term and Creep Shear Characteristics of a Needlepunched Thermally Locked Geosynthetic Clay Liner1997