Microstructure Evolution and Strength–Toughness Trade-Off in 1Cr12Ni2WMoVNb Martensitic Stainless Steel During Tempering
Open Access
Abstract
The influence of tempering temperature on the microstructure evolution and mechanical properties of 1Cr12Ni2WMoVNb martensitic stainless steel was systematically investigated in the range of 200–650 °C. Microhardness, tensile strength, and impact toughness were evaluated, combined with analyses using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), and phase characterization techniques. The results show that hardness and tensile strength initially decrease, then increase to a peak at approximately 550 °C due to secondary hardening, and finally decline significantly. In contrast, impact toughness exhibits an inverse trend, revealing a clear strength–toughness trade-off. Microstructural analysis indicates that this behavior is governed by the competition among multiple strengthening mechanisms. At intermediate temperatures, the precipitation of fine and dispersed M23C6 carbides leads to strong dislocation pinning and pronounced precipitation strengthening, resulting in peak strength but reduced plastic deformation capability. At higher temperatures, carbide coarsening and dislocation recovery weaken strengthening while restoring plasticity, thereby improving toughness. These findings clarify the temperature-dependent competition among strengthening mechanisms governing the strength–toughness evolution during tempering.Keywords
Funding Information
- National Natural Science Foundation of China (52475459)
- Engineering Research Center of Anti-Fatigue Manufacturing for Marine Equipment of Fujian Province (Z823291)
- Science and Technology Project of Fujian Province (2025J01406)
- Science and Technology Project of Fujian Province (2022HZ024009)
- Science and Technology Project of Fujian Province (2021HZ024006)
- Research Project on Manufacturing Technology for Long-Life Fatigue-Resistant Connecting Pins (2024350204006292)
- Research Project on Failure Mechanisms and Anti-Fatigue Manufacturing Technologies of Steam Turbine Blades (2025350204006809)
This publication has 53 references indexed in Scilit:
- Mechanical behavior and microstructural evolution of a modified CSS-42L steel during temperingJournal of Iron and Steel Research International, 2025
- Role of Double Quenching and Tempering in Improving the Low-Temperature Impact Toughness of SA350 LF3 SteelMetals and Materials International, 2025
- Effect of Elevated Temperature on Low Cycle Fatigue and Tensile Strength of 12Cr Ferritic SteelMetals and Materials International, 2024
- Tempering influence on residual stresses and mechanical properties of AISI 4340 steelThe International Journal of Advanced Manufacturing Technology, 2022
- Effect of Tempering Treatment on Atmospheric Corrosion Behavior of 3Cr13 Martensitic Stainless Steel in Marine EnvironmentJournal of Materials Engineering and Performance, 2022
- A model for dynamic embrittlementActa Metallurgica et Materialia, 1995
- Lattice parameters of iron-carbon and iron-nitrogen martensites and austenitesScripta Metallurgica et Materialia, 1990
- Precipitation hardeningMetallurgical Transactions A, 1985
- The influence of rolling variables on the strengthening mechanisms operating in niobium steelsMaterials Science and Engineering, 1984
- Average stress in matrix and average elastic energy of materials with misfitting inclusionsActa Metallurgica, 1973