A warpage-free Si 3N 4 slurry strategy for vat photopolymerization
Open Access
- 1 January 2025
- journal article
- research article
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 14 (1)
Abstract
Si3N4 ceramics are promising wave-transparent materials with excellent mechanical and dielectric properties. Vat photopolymerization (VPP) 3D printing provides a strategy for preparing ceramics with controllable complex structures. However, the difficulty in solidifying the slurry due to partial ultraviolet (UV) light absorption and high refractive index by the Si3N4 particles during the VPP process severely hampers the molding of Si3N4 ceramics. Higher laser power has to be used to increase the curing depth, which generates large internal stresses and leads to the warping of the samples. This paper presents a method to solve the warpage problem during VPP-3D printing using tributyl citrate as a plasticizer. The plasticizer can weaken the force between polymer molecular chains and reduce the internal stress of the green body. The warpage decreases gradually with the increase of tributyl citrate content, and the warpage decreases to 0 when the plasticizer content reaches 30 wt.% at high laser powers from 600 mW to 750 mW. Samples with different layer thicknesses were printed and the optimum thickness of 40 μm was obtained, at which the sintered Si3N4 samples possess a unique combination of mechanical properties, including a bending strength of 338.29±12.08 MPa, a fracture toughness of 6.94±0.11 MPa·m1/2 for the loading direction perpendicular and 5.37±0.99 MPa·m1/2 for the loading direction parallel to the build surface, respectively. The dielectric constant of all the samples is maintained in the range of 5.462 to 6.414. This work is expected to guide vat photopolymerization and the preparation of complex Si3N4 ceramic components.Keywords
This publication has 58 references indexed in Scilit:
- Uniform rate debinding for Si3N4 vat photopolymerization 3D printing green parts using a specific-stage stepwise heating processAdditive Manufacturing, 2024
- Large-size Si3N4 ceramic fabricated by additive manufacturing using long-term stable hydrogel-based suspensionsAdditive Manufacturing, 2023
- Effect of non-reactive diluent on defect-free debinding process of 3D printed ceramicsAdditive Manufacturing, 2023
- Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processingAdditive Manufacturing, 2022
- Photopolymerization-based additive manufacturing of ceramics: A systematic reviewJournal of Advanced Ceramics, 2021
- Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltrationJournal of Advanced Ceramics, 2019
- Porous (SiCw-Si3N4w)/(Si3N4-SiC) composite with enhanced mechanical performance fabricated by 3D printingCeramics International, 2018
- Citrate- and glycerol triesters as novel dual-functional dispersants and plasticisers for ceramic processingCeramics International, 2018
- Effect of different preparation methods on the microstructure and mechanical properties of Si3N4 ceramic compositesCeramics International, 2018
- Influence of water soluble and insoluble plasticizers on the physical and mechanical properties of acrylic resin copolymersInternational Journal of Pharmaceutics, 1994