Development and Thermal Characterization of a Mechanically Packaged Hetero-Core Optical Fiber Temperature Sensor
Open Access
- 20 November 2026
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 17 (11) , 1350
Abstract
This study presents the development and thermal characterization of a mechanically packaged Hetero-core optical fiber temperature sensor utilizing the thermal expansion of a silicone pad. To improve the insufficient optical-output recovery observed during cooling in our previous adhesive-fixed sensor, a poly(butylene succinate) (PBS)-based mechanical packaging structure was developed to replace direct adhesive fixation of the Hetero-core sensing region. Thermally induced deformation of the silicone pad produces variations in optical transmission loss, which are detected and converted into electrical voltage signals. Four sensor configurations, combining two silicone pad thicknesses and two Hetero-core insertion lengths, were evaluated using one specimen per configuration through three consecutive heating–cooling cycles over a temperature range of 20–80 °C. The experimental results demonstrated temperature-dependent responses with configuration-dependent differences in linearity, thermal hysteresis, and cycle-to-cycle repeatability. The configuration with a 2 mm thick silicone pad and a 2 mm Hetero-core insertion length exhibited the lowest average hysteresis (15.04% FS), whereas the configuration with a 5 mm thick pad and a 2 mm insertion length showed the lowest heating repeatability error (11.56% FS). The configuration with a 5 mm thick pad and a 3 mm insertion length exhibited the lowest cooling repeatability error (6.12% FS), indicating that the preferred sensor configuration depends on the performance criterion considered. Although further improvements in sensing performance and validation of measurement accuracy, response time, and device-to-device reproducibility are required, the results demonstrate the feasibility of the proposed approach for further development of optical fiber temperature sensors for abnormal-temperature monitoring in electrical equipment.Keywords
Funding Information
- Pukyong National University Research Fund
This publication has 21 references indexed in Scilit:
- Concrete crack detection method based on optical fiber sensing network and microbending principleSafety Science, 2019
- Handbook of Modern Sensors2016
- Intensity‐modulated fiber optic sensor for health monitoring applications: a comparative reviewSensor Review, 2013
- Optical fibre gratings as tools for chemical and biochemical sensingAnalytical and Bioanalytical Chemistry, 2011
- Strain and Temperature Sensing Characteristics of Single-Mode–Multimode–Single-Mode StructuresJournal of Lightwave Technology, 2009
- Fiber-Optic Sensing: A Historical PerspectiveJournal of Lightwave Technology, 2008
- Review of the present status of optical fiber sensorsOptical Fiber Technology, 2003
- Fiber optic sensor technology: an overviewSensors and Actuators A: Physical, 2000
- Fiber grating sensorsJournal of Lightwave Technology, 1997
- Fiber Bragg grating technology fundamentals and overviewJournal of Lightwave Technology, 1997