Effect of functionality of diluents on digital light processing (DLP) based three‐dimensional (3D) printing of UV‐curable bisphenol A‐based epoxy acrylate resin
Authors:
- 26 February 2024
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (5) , 2202-2213
Abstract
Digital light processing (DLP) based three‐dimensional (3D) printing technology which uses photocurable resin has been a center of interest due to its printing accuracy and printing speed. In our research, we have synthesized and modified the bisphenol A‐based epoxy acrylate resin for the DLP 3D printer having a printing accuracy of 50 μm. As the viscosity plays an important role in printing accuracy, the resin was modified with mono‐functional, di‐functional, tri‐functional, and combination of di‐tri functional acrylate diluents as well as with photoinitiator to achieve the desired level of viscosity. The process parameters like curing time and intensity were optimized using the DLP 3D printer. The uncured and UV‐cured samples were characterized using FTIR‐ATR, 1 HNMR, UV–VISIBLE, and TGA techniques. The analysis of the uncured and UV‐cured samples was carried out using viscosity, gel content, water absorption, and chemical resistance test. The mechanical properties of the UV‐cured samples were determined using hardness and tensile strength test. The 3D‐printed samples were observed under high‐resolution microscope to confirm the printing quality and resolution. The resulting outcome confirmed that the proper selection of diluents is an important parameter for achieving the good quality and resolution of samples printed using the DLP 3D printer technology. Highlights: Synthesis and modification of UV‐curable resin Selection of diluents for controlling the processablility of UV‐curable resin Optimization of process parameters for DLP based 3D printer 3D printing of samples having good quality, resolution and feature size.Keywords
Funding Information
- Ministry of Electronics and Information technology
This publication has 37 references indexed in Scilit:
- Advances in 4D Printing: Materials and ApplicationsAdvanced Functional Materials, 2018
- Thermal and mechanical properties of acrylated expoxidized‐soybean oil‐based thermosetsJournal of Applied Polymer Science, 2010
- Ultraviolet‐curing behavior of an epoxy acrylate resin systemJournal of Applied Polymer Science, 2005
- Kinetics of acrylic films photopolymerization through analysis of the thermal curveJournal of Applied Polymer Science, 2000
- Electron-beam curing of thick thermoset composites: Effect of temperature and fiberMacromolecular Materials and Engineering, 2000
- Effects of nonreactive resins on the properties of a UV-curable methacrylated urethane resinJournal of Applied Polymer Science, 1998
- Polymerization kinetics of photocurable acrylic resinsJournal of Polymer Science Part A: Polymer Chemistry, 1998
- Ultraviolet curing of epoxy coating on wood surfaceJournal of Applied Polymer Science, 1997
- Effect of structure on the thermal stability of photocurable urethane acrylate formulationsJournal of Applied Polymer Science, 1991
- Preparation and properties of UV‐autocurable BTDA‐based polyester multiacrylates. I. Effects of acrylic functionality and polyol molecular weightJournal of Applied Polymer Science, 1990