Effect of Cross-Frames on Load Distribution of Steel Bridges with Fractured Girder
Open Access
- 1 April 2020
- journal article
- research article
- Published by MDPI AG in Infrastructures
- Vol. 5 (4) , 32
Abstract
In steel girder bridges, fracture of one girder may occur without noticeable bridge profile changes. It is critical to ensure that the bridge will have adequate capacity to prevent collapse until the next cycle of inspection discovers the damage. It is realized that once one of the bridge girders is fractured, vertical loads need to be distributed through an alternative path to the intact girder(s). In this case, cross-frames can play an important role in transferring the loads and preventing from sudden collapse. This paper investigates the impact of cross-frames on load distribution after a fracture is occurred in one girder. Bridge configurations with different cross-frame spacing were studied using finite element modeling and simulation of the bridge behavior with a fractured steel plate girder. Nonlinear and dynamic solution methods were used for these analyses. Results of this investigation demonstrated the important role cross-frames can play in providing some reserved capacity for the bridge with fractured girder to enhance the bridge redundancy. The contribution of the cross-frames and the behavior of the bridge after fracture in one girder however depends on the configuration of the bridge. A study of the variation of the effect of cross-frames with respect to the number of girders is also included in this paper.Keywords
This publication has 31 references indexed in Scilit:
- Experimental evaluation of concrete-to-UHPC bond strength with correlation to surface roughness for repair applicationConstruction and Building Materials, 2020
- Novel Approaches for Fracture Detection in Steel Girder BridgesInfrastructures, 2019
- Ductile behavior of existing internal end diaphragms in steel tub girder bridgesJournal of Constructional Steel Research, 2018
- Distortion-Induced Fatigue Cracking in a Seismically Retrofitted Steel BridgeJournal of Performance of Constructed Facilities, 2016
- Optimizing Horizontally Curved, Steel Bridge, Cross-Frame Arrangements to Enhance Construction PerformanceJournal of Bridge Engineering, 2014
- Parametric Analysis of Cross-Frame Layout on Distortion-Induced Fatigue in Skewed Steel BridgesJournal of Bridge Engineering, 2013
- Buckling Behavior of Steel Bridge I-Girders Braced by Permanent Metal Deck FormsJournal of Bridge Engineering, 2012
- Prediction of fatigue crack growth in steel bridge components using acoustic emissionJournal of Constructional Steel Research, 2011
- Seismic Performance of Steel Girder Bridges with Ductile Cross Frames Using Single Angle X BracesJournal of Structural Engineering, 2006
- Seismic Behavior of Steel Girder Bridge SuperstructuresJournal of Bridge Engineering, 2004