ODU Optimization of Nb3Sn supttering on SRF structures
Authors:
- US Department of EnergyUEUS Department of Energy
- Hani Elsayed-AliHEHani Elsayed-Ali
- Batavia Fermi National Accelerator Laboratory (Fnal)B(Batavia Fermi National Accelerator Laboratory (Fnal)
- Old Dominion U.OUOld Dominion U.
- Grigory Eremeev EremeevGEGrigory Eremeev Eremeev
Open Access
- 28 October 2024
- report
- Published by Office of Scientific and Technical Information (OSTI)
Abstract
High efficiency Superconducting radio-frequency (SRF) cavities are the key technology to cost-effective Continuous Wave (CW) SRF accelerators. Recent advances in Nb3Sn coatings on theinner surface of SRF cavities showed the potential for this material to significantly cut thecapital and operating cost of SRF accelerators. The best results are presently achieved withNb3Sn films coated by using the so-called vapor diffusion technique. Several alternativeapproaches have been and are being investigated such as electrochemical deposition, bronzeroutes, and sputtering. Among these techniques, magnetron sputtering is a versatile technique,which has been demonstrated to deposit Nb3Sn films on SRF cavities. The technique requiresfurther development to compete with the results demonstrated on the cavities coated with thevapor diffusion techniques.The team to develop the novel technique includes a graduate student from Old DominionUniversity (ODU) and other experts. ODU Prof. Elsayed-Ali directs the graduate student to coatsamples and cavities in the new coating system and analyze samples with different surfacescience techniques. Dr. Grigory Eremeev from Fermilab assists with 2.6 GHz cavities forcoating, cavity characterization at cryogenic temperature, and result analysis. The research isfunded by the Office of High Energy Physics at the US Department of Energy at both Fermilaband ODUKeywords
Funding Information
- US Department of Energy (89243024CSC000002)
- DOE (AC02-07CH11359)