GEGrigory Eremeev

Grigory Eremeev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Grigory Eremeev has a total of 114 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    First beam demonstration of a conduction-cooled Nb 3 Sn superconducting rf photoinjector

    by Chunguang Jing, Roman Kostin, Yubin Zhao, Pavel Avrakhov, Ernie Knight, Sam Posen, Grigory Eremeev, Timergali Khabiboulline, Damon Bice, Alexander Netepenko, et al.

    We report on the first beam produced by the world’s first conduction-cooled superconducting radio frequency (srf) photogun. Over the past 5 years, Euclid, working in collaboration with Fermilab and Argonne National Laboratory, has been developing a continuous-wave (cw), 1.5-cell, MeV-scale, conduction-cooled srf photogun operating at 1.3 GHz. The primary objective of this effort is to demonstrate ultrastable electron beams for ultrafast electron microscopy/diffraction (UEM/UED) applications, enabled by the exceptional shot-to-shot stability achievable with srf technology compared to room-temperature rf photoguns. Although srf systems were historically too costly for industrial deployment, two recent advancements: Nb 3 Sn coatings and conduction cooling, have dramatically reduced system complexity and operating costs. This srf photogun is designed to deliver true cw rf operation while dissipating only ∼ 2 W of rf power, eliminating the need for a high-power rf system and significantly reducing facility footprint. This srf photogun also features a raised Nb 3 Sn backwall serving as the photocathode, removing the need for an external cathode insert. cw rf operation with limited repetitive beam has been demonstrated. In this paper, we present the first beam results from this system along with its cooldown performance, Q -slope behavior, synchronization characteristics, and initial beam parameters.

  • Nb3Sn coating of SRF cavity by cosputtering from a composite target

    by Sharifuzzaman Shakel, Grigory V. Eremeev, Anne-Marie Valente-Feliciano, Uttar Pudasaini, Hani E. Elsayed-Ali

    We deposited an Nb3Sn film on the inner surface of a 2.6 GHz Nb superconducting radio frequency cavity by cosputtering using a composite of Nb and Sn tube targets in a DC cylindrical magnetron sputtering system, followed by the thermal annealing of the coated cavity. An aluminum mockup cavity, replicating a 2.6 GHz Nb SRF cavity geometry, was utilized to optimize deposition parameters, resulting in cosputtered Nb–Sn films with an Sn content of 32–42 at. % on the beam tubes and equator positions. Several annealing conditions were investigated to improve the surface homogeneity of the Nb3Sn film. The best cosputtered Nb–Sn film was achieved after annealing at 600 °C for 6 h, followed by annealing at 950 °C for 1 h. The best process was applied to a Nb cavity, which was RF tested in a cryogenic dewar. RF testing of the Nb3Sn-coated cavity demonstrated a superconducting transition temperature of 17.78 K. The Nb3Sn cavity underwent light Sn recoating, followed by additional RF testing, resulting in the enhancement of the RF performance, primarily due to the improved surface homogeneity of the Nb3Sn coating.


  • Open Access

    Superconducting low-beta Nb3Sn cavity for ATLAS and future ion accelerators

    by Troy Bennet Petersen, Michael Kelly, Sam Posen, Tom Reid, Gary Zinkann, Paul Davis, Ed Spranza, Ronald Agustsson, Sergey Kutsaev, Ben Guilfoyle, et al.

    We report on a Nb3Sn-coated low-beta superconducting radio frequency (SRF) cavity intended for accelerating ions. We aim to apply the cavity in ATLAS, our Argonne National Laboratory user facility for nuclear physics studies with ion beams in the energy range of 5-20 MeV/u. The Nb3Sn-coated cavity, a 145 MHz quarter-wave optimized for ions moving with velocity β=v/c=0.08 exhibits an order-of-magnitude reduction in radiofrequency (RF) losses into helium at 4.4 K compared to a superconducting niobium (Nb) cavity at the same frequency and temperature. Experimentally measured fields are among the highest to date for any Nb3Sn-coated cavity, reaching a peak surface magnetic field of 105 mT. We also present a practical solution to the problem of cavity frequency tuning. Tuning by mechanical deformation has been a challenge with Nb3Sn due to its brittle nature, however, using a set of techniques tailored to the properties of thin-film Nb3Sn on Nb, we can repeatably tune the cavity to the ATLAS master clock frequency after it is cooled, while maintaining the excellent performance characteristics. The same Nb3Sn cavity technology offers broad benefits for future ion accelerators.


  • Open Access

    Quantifying trapped magnetic vortex losses in niobium resonators at mK temperatures

    by D. Bafia, B. Abdisatarov, R. Pilipenko, Y. Lu, G. Eremeev, A. Romanenko, A. Grassellino

    Trapped magnetic vortices in niobium introduce microwave losses that degrade the performance of superconducting resonators. While such losses have been extensively studied above 1 K, we report here their direct quantification in the millikelvin and low-photon regime relevant to quantum devices. Using a high-quality factor 3D niobium cavity cooled through its superconducting transition in controlled magnetic fields, we isolate vortex-induced losses and find the resistive component of the sensitivity to trapped flux S to be approximately 2 n Ω/mG at 10 mK and 6 GHz. The decay rate is initially dominated by two-level system (TLS) losses from the native niobium pentoxide, with vortex-induced degradation of T1 occurring above Btrap∼ 50 mG. In the absence of the oxide, even 10 mG of trapped flux limits performance, Q0∼ 1010, or T1∼ 350 ms, underscoring the need for stringent magnetic shielding. The resistive sensitivity, S, decreases with temperature and remains largely field-independent, whereas the reactive component, S′, exhibits a maximum near 0.8 K. These behaviors are well modeled within the Coffey–Clem framework in the zero-creep limit, under the assumption that vortex pinning is enhanced by thermally activated processes. Our results suggest that niobium-based transmon qubits can tolerate vortex-induced dissipation at trapped field levels up to several hundred mG, but achieving long coherence times still requires careful magnetic shielding to suppress lower-field losses from other mechanisms.


  • Open Access

    Demonstration of E acc = 10 MV m−1 with Nb3Sn cavities in a cryomodule

    by G Eremeev, U Pudasaini, S Cheban, G Ciovati, M Drury, J Fischer, K Macha, M McCaughan, A Reilly, R Rimmer, et al.

    Accelerating cryomodules with superconducting cavities are key components for particle accelerators. The efficiency, energy gain and operating temperature of cavities drive the operating and capital costs; hence, advances in these areas enable future accelerators. While superconducting cavities are currently made from Nb, Nb3Sn, with a superconducting transition temperature and superheating field approximately twice that of Nb, is poised to substantially improve the efficiency and energy gain. We present results from the first cryomodule with two five-cell 1.5 GHz superconducting radiofrequency Nb cavities coated with Nb3Sn, which attained an accelerating gradient of ⩾ 10 MV m−1 with low cryogenic loss at 4.4 K.


  • Open Access

    Optimizing superconducting Nb film cavities by mitigating medium-field Q-slope through annealing

    by B Abdisatarov, G Eremeev, H E Elsayed-Ali, D Bafia, A Murthy, Z Sung, A Netepenko, A Romanenko, C P A Carlos, G J Rosaz, et al.

    Niobium films are of interest in applications in various superconducting devices, such as superconducting radiofrequency cavities for particle accelerators and superconducting qubits for quantum computing. In this study, we address the persistent medium-field Q-slope issue in Nb film cavities, which, despite their high-quality factor at low RF fields, exhibit a significant Q-slope at medium RF fields compared to bulk Nb cavities. Traditional heat treatments, effective in reducing surface resistance and mitigating the Q-slope in bulk Nb cavities, are challenging for Nb-coated copper cavities. To overcome this challenge, we employed DC bias high-power impulse magnetron sputtering to deposit Nb film onto a 1.3 GHz single-cell elliptical bulk Nb cavity, followed by annealing treatments aimed at modifying the properties of the Nb film. In-situ annealing at 340 °C increased the quench field from 10.0 to 12.5 MV m−1. Vacuum furnace annealing at 600 °C and 800 °C for 3 h resulted in a quench field increase of 13.5 and 15.3 MV m−1, respectively. Further annealing at 800 °C for 6 h boosted the quench field to 17.5 MV m−1. Additionally, the annealing treatments significantly reduced the field dependence of the surface resistance. However, increasing the annealing temperature to 900 °C induced a Q-switch phenomenon in the cavity. The analysis of RF performance and material characterization before and after annealing has provided critical insights into how the microstructure and impurity levels in Nb films influence the evolution of the Q-slope in Nb film cavities. Our findings highlight the significant roles of hydrides, high local misorientation, and lattice and surface defects in driving field-dependent losses. By strategically optimizing film properties and controlling impurity levels, we demonstrate a promising pathway to mitigate the medium-field Q-slope, paving the way for more efficient superconducting RF technologies.


  • Progress in $Nb_3Sn$ SRF Technology: Opportunities and Outlook

    by US Department of Energy, Grigory Eremeev, Batavia Fermi National Accelerator Laboratory (Fnal)

  • Open Access

    ODU Optimization of Nb3Sn supttering on SRF structures

    by US Department of Energy, Hani Elsayed-Ali, Batavia Fermi National Accelerator Laboratory (Fnal), Old Dominion U., Grigory Eremeev Eremeev

    High efficiency Superconducting radio-frequency (SRF) cavities are the key technology to cost-effective Continuous Wave (CW) SRF accelerators. Recent advances in Nb3Sn coatings on theinner surface of SRF cavities showed the potential for this material to significantly cut thecapital and operating cost of SRF accelerators. The best results are presently achieved withNb3Sn films coated by using the so-called vapor diffusion technique. Several alternativeapproaches have been and are being investigated such as electrochemical deposition, bronzeroutes, and sputtering. Among these techniques, magnetron sputtering is a versatile technique,which has been demonstrated to deposit Nb3Sn films on SRF cavities. The technique requiresfurther development to compete with the results demonstrated on the cavities coated with thevapor diffusion techniques.The team to develop the novel technique includes a graduate student from Old DominionUniversity (ODU) and other experts. ODU Prof. Elsayed-Ali directs the graduate student to coatsamples and cavities in the new coating system and analyze samples with different surfacescience techniques. Dr. Grigory Eremeev from Fermilab assists with 2.6 GHz cavities forcoating, cavity characterization at cryogenic temperature, and result analysis. The research isfunded by the Office of High Energy Physics at the US Department of Energy at both Fermilaband ODU