Analytical Modeling and Controller Design of a Modular Series Parallel Resonant Converter System for a Solid State 2.88-MW/115-kV Long Pulse Modulator
- 19 December 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 33 (10) , 9047-9063
Abstract
In this paper, two control strategies for voltage balancing in a modular serial parallel resonant converter modulator system, which is used in a high voltage pulsed power application, are presented and verified by simulations and measurements. The system is based on two series parallel resonant converter modules, forming an input series output parallel stack. To obtain the given output voltage pulse of 115 kV, 9 of these input series output parallel stacks are connected in parallel at the input and in series at the output, forming an input parallel output series system. A robust input voltage balancing by an auxiliary circuit and an output voltage balancing by control is introduced and proofen by measurements. In addition, an alternative approach, where the input and output voltage balancing is achieved purley by control, is given and verified by simulations. For designing the control of this system, a large and a small signal model is derived and the influence of component tolerances is investigated.Keywords
Funding Information
- CTI and Ampegon AG under CTI-research project (13135.1)
This publication has 18 references indexed in Scilit:
- Control of a modular series parallel resonant converter system for a solid state 2.88MW/115-kV long pulse modulator2015
- Optimal Design of a Modular Series Parallel Resonant Converter for a Solid State 2.88 MW/115-kV Long Pulse ModulatorIEEE Transactions on Plasma Science, 2014
- A Circuit for the Large and Small Signal Dynamic Modeling of the PRC-LCC Resonant Topology with a Capacitor as Output Filter2006
- A Long Pulse Modulator For Reduced Size And Cost2005
- A review and performance evaluation of control techniques in resonant converters2005
- Active Input–Voltage and Load–Current Sharing in Input-Series and Output-Parallel Connected Modular DC–DC Converters Using Dynamic Input-Voltage Reference SchemeIEEE Transactions on Power Electronics, 2004
- A multilevel inverter approach providing DC-link balancing, ride-through enhancement, and common-mode voltage eliminationIEEE Transactions on Industrial Electronics, 2002
- Modeling, control, and design of input-series-output-parallel-connected converter for high-speed-train power systemIEEE Transactions on Industrial Electronics, 2001
- An RC load model of parallel and series-parallel resonant DC-DC converters with capacitive output filterIEEE Transactions on Power Electronics, 1999
- Modular DC–DC convertor for high-output voltage applicationsIEE Proceedings B Electric Power Applications, 1993