Effect of glass fiber loading and reprocessing cycles on the mechanical, thermal, and morphological properties of isotactic polypropylene composites
- 2 January 2023
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (10)
Abstract
In this study, a preliminary finding is carried out to obtain the optimum E‐glass fiber content in polypropylene (PP) plastic products using loadings of 5, 10, 20, 30, and 40 wt%. The formulation with the optimum loading of 10 wt% glass fiber was reprocessed 10 times via extrusion and compression molding techniques to simulate actual recycling and impacts on service life properties such as mechanical, toughness, chemical, thermal, composition, and morphology. In the result, mechanical properties were lost after each reprocessing without effect on the chemical properties and elemental compositions. The thermal studies showed a decrease in degradation temperatures with the onset degradation temperature (TOnset) for the one‐time reprocessed PP recorded at 336.93°C with a maximum rate of weight loss (TMax) at 427.68°C which further reduced to 259.90°C (TMax of 388.47°C) after 10 extrusion run showing one‐step decomposition patterns. This work provides that glass fiber‐reinforced plastics should not be reprocessed beyond 3 times except when refreshed with the addition of virgin PP to make up for the lost property. This will be very useful for manufacturers who want to simultaneously save costs (retain profit margin) and maintain the environment.Keywords
This publication has 52 references indexed in Scilit:
- Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blendsPolymer Degradation and Stability, 2012
- Recycling-oriented characterization of small waste electrical and electronic equipmentWaste Management, 2009
- Structure and mechanical properties of a talc‐filled polypropylene/ethylene‐propylene‐diene composite after reprocessing in the melt stateJournal of Applied Polymer Science, 2009
- The influence of fibre length, diameter and concentration on the modulus of glass fibre reinforced polyamide 6,6Composites Part A: Applied Science and Manufacturing, 2008
- Recycling of polypropylene‐based eco‐compositesPolymer International, 2008
- Development of HEMP Fiber Reinforced Polypropylene CompositesJournal of Thermoplastic Composite Materials, 2008
- The Effect of γ‐Irradiation on the Structure and Properties of Poly(propylene)/Clay NanocompositesMacromolecular Materials and Engineering, 2007
- Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recyclingComposites Science and Technology, 2005
- Temperature and molecular weight dependence of fracture behaviour of polypropylene filmsPolymer Testing, 2004
- Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene compositesComposites Part A: Applied Science and Manufacturing, 2000