ADAbdullahi Danladi

Abdullahi Danladi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abdullahi Danladi has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of reprocessing on the service life properties of glass fiber-reinforced in-house polypropylene waste composites

    by Emmanuel O. Achukwu, Macaulay M. Owen, Solehuddin Bin Shuib, Abubakar Umar, Abdulwahab O. Abdulmalik, Abdullahi Danladi, Benjamin M. Dauda, Ahmad Zafir Romli, Umaru S. Ishiaku, Akil Md Hazizan

    Reprocessing of synthetic fiber-reinforced thermoplastics for reuse in the design of structural components applications is important owing to their non-biodegradability. This study evaluates the effect of reprocessing on the service life properties of in-house polypropylene wastes reinforced with E-glass fiber. Composite materials containing 10 mm length glass fiber (GF) and recycled polypropylene were manufactured with 10 wt% GF and subjected to five reprocessing cycles via extrusion and compression molding under similar conditions. Properties such as mechanical, melt flow index (MFI), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), and scanning electron microscopy (SEM) analysis were used to analyze the effect of reprocessing on the composites. The results obtained revealed that the composites’ properties diminished with successive reprocessing. The thermal study showed reductions in the thermal stabilities with a drop in onset degradation temperature from 338.07 to 245.15 °C after five runs, indicating an increase in the polymer chain molecular movement and less rigidity due to shorter chains provided by X-ray diffraction analysis with reduced peak intensities, average crystallite sizes, and degree of crystallinities but no destruction of the main functional groups was observed with the spectral studies. An increase in the MFI (6 g/10–17.88 g/10 min) indicated the possible loss of complex viscosity and damage in molecular weight for the reprocessed matrix. Reinforced in-house PP plastics can, therefore, be reprocessed twice only for the same product except with the addition of either virgin PP or other materials to compensate for the lost properties and help manufacturers save costs. Graphical Abstract


  • Effect of glass fiber loading and reprocessing cycles on the mechanical, thermal, and morphological properties of isotactic polypropylene composites

    by Emmanuel O. Achukwu, Macaulay M. Owen, Abdullahi Danladi, Benjamin M. Dauda, Ahmad Z. Romli, Umaru S. Ishiaku, Hazizan Md Akil

    In this study, a preliminary finding is carried out to obtain the optimum E‐glass fiber content in polypropylene (PP) plastic products using loadings of 5, 10, 20, 30, and 40 wt%. The formulation with the optimum loading of 10 wt% glass fiber was reprocessed 10 times via extrusion and compression molding techniques to simulate actual recycling and impacts on service life properties such as mechanical, toughness, chemical, thermal, composition, and morphology. In the result, mechanical properties were lost after each reprocessing without effect on the chemical properties and elemental compositions. The thermal studies showed a decrease in degradation temperatures with the onset degradation temperature (TOnset) for the one‐time reprocessed PP recorded at 336.93°C with a maximum rate of weight loss (TMax) at 427.68°C which further reduced to 259.90°C (TMax of 388.47°C) after 10 extrusion run showing one‐step decomposition patterns. This work provides that glass fiber‐reinforced plastics should not be reprocessed beyond 3 times except when refreshed with the addition of virgin PP to make up for the lost property. This will be very useful for manufacturers who want to simultaneously save costs (retain profit margin) and maintain the environment.