Microstructural and Mechanical Characterization of Catalyst Coated Membranes Subjected to In Situ Hygrothermal Fatigue
Open Access
- 9 October 2015
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 162 (14) , F1461-F1469
Abstract
Catalyst coated membranes (CCMs) in polymer electrolyte fuel cells are subjected to mechanical stresses in the form of fatigue and creep that deteriorate the durability and lifetime of the cells. The present article aims to determine the effect of in-situ hygrothermal fatigue on the microstructure and mechanical properties of the CCM. The fatigue process is systematically explored by the application of two custom-developed accelerated mechanical stress test (AMST) experiments with periodic extraction of partially degraded CCMs. Cross sectional and top surface scanning electron microscope (SEM) images of the end-of-test CCMs reveal the formation of mechanically induced cracks and delamination due to cyclic tensile and compressive fatigue stress. Tensile and expansion tests are conducted at different stages of degradation to evaluate the evolution in the mechanical and hygrothermal properties of the CCM. The tensile test results indicate gradual reductions in final strain, ultimate tensile strength, and fracture toughness with increasing number of fatigue cycles. The decay in tensile properties is attributed to the microstructural damage and micro-cracks formed during the AMST. Moreover, it is shown that the hygrothermal expansion of the CCM is more sensitive to conditioning than mechanical degradation.Keywords
This publication has 45 references indexed in Scilit:
- Mitigation of Chemical Membrane Degradation in Fuel Cells: Understanding the Effect of Cell Voltage and Iron Ion Redox CycleChemSusChem, 2015
- Quantifying the Structural Changes of Perfluorosulfonated Acid Ionomer upon Reaction with Hydroxyl RadicalsJournal of the American Chemical Society, 2013
- A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: Causes, consequences, and mitigation strategiesJournal of Power Sources, 2012
- A review of accelerated stress tests of MEA durability in PEM fuel cellsInternational Journal of Hydrogen Energy, 2009
- The Chemistry of Fuel Cell Membrane Chemical DegradationECS Transactions, 2008
- A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategiesJournal of Power Sources, 2008
- An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membraneMaterials Science and Engineering: A, 2006
- Mechanical properties of Nafion™ electrolyte membranes under hydrated conditionsPolymer, 2005
- Influence of temperature and humidity on the mechanical properties of Nafion® 117 polymer electrolyte membraneJournal of Polymer Science Part B: Polymer Physics, 2005
- Water Uptake of Perfluorosulfonic Acid Membranes from Liquid Water and Water VaporJournal of the Electrochemical Society, 1994