Abstract
Aim: The aim of the study was to evaluate the color-matching ability of four different single-shade composite resins used to repair of two multi-shade aesthetic composite resins after thermal aging. Materials and Methods: A total of 100 disc-shaped samples, 50 from each of two aesthetic composites [GC Kalore (GC), A2 and Filtek™ Ultimate (FU), A2 body] were prepared with a height of 4 mm and a diameter of 10 mm. After initial surface preparation, the samples were aged through 5,000 thermal cycles. Subsequently, the surfaces were treated again using Sof- Lex discs and stored in distilled water at 37 ºC for 24 hours. Initial color parameters (L1, a1, b1, C1, h1) were measured using a clinical spectrophotometer. The samples in each group were then randomly divided into five groups (n = 10 each) and numbered. Cavities of 2 mm depth and 6 mm diameter were prepared on the sample surfaces. After acid etching for 30 seconds, a two-step total-etch adhesive (Adper Single Bond 2) was applied, and the cavities were filled with four different single-shade composite resins (Omnichroma, Vittra APS Unique, Charisma Topaz One and Olident ONEshade). Control groups were restored with FU and GC. After polymerization procedure, the samples were again subjected to surface treatment with the disc polishing system and stored in distilled water at 37 ºC for 24 hours. Final color parameters (L2, a2, b2, C2, h2) were measured, and the color change (ΔE00) was calculated using the CIEDE2000 formula. The data were analyzed using two-way ANOVA and post-hoc Tukey tests. Results: The ΔE00 values varied significantly depending on the single-shade composite used (p

This publication has 28 references indexed in Scilit: