Magnetic behavior and chaining of strontium ferrite-nylon composite above the melting temperature
Open Access
- 1 February 2023
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025024
Abstract
To better understand Magnetic Field Assisted Additive Manufacturing (MFAAM) the effect of a magnetic field on the orientation and distribution of magnetic particles in a molten magnetic composite was studied. Vibrating Sample Magnetometer (VSM) measurements were made on Sr-ferrite/PA12 fused deposition modeling filaments of different packing fraction (5 and 40 wt. %). The rotation of the sample’s magnetic moment upon application of a field perpendicular to the easy axis was monitored with a biaxial VSM above the PA12’s softening temperature. The observed magnetic moment transients depend on the temperature, the applied alignment field, the packing fraction, and the initial field-anneal procedure. Longer field-anneals result in larger time constants and seem to induce a hurdle that prevents complete alignment at low temperatures and/or for small fields. Results indicate the molten composite is a non-Newtonian fluid that can support a yielding stress. Scanning Electron microscopy (SEM) images taken on field-annealed samples at 230 °C show strong chaining with little PA-12 left between individual Sr-ferrite particles suggesting that direct particle to particle interaction is the reason for the observed non-zero yielding stress. The melt viscosity of the composite increases with the number of thermal cycles above the melting temperature (Tm). Room temperature (RT) torque magnetometry measurements show that magnetic anisotropy depends on the field annealing process through induced shape anisotropy contributions originating from magnetic particle agglomerates.Keywords
Funding Information
- NSF Through DMR-MRI Grant (1726970)
- NSF (2216440)
- DOD Through a HBCU/MI Grant (W911NF2010298)
This publication has 20 references indexed in Scilit:
- Interaction between two magnetic dipoles in a uniform magnetic fieldAIP Advances, 2016
- Multimaterial magnetically assisted 3D printing of composite materialsNature Communications, 2015
- Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sinteringPolymer Testing, 2014
- Non-linear alignment dynamics in suspensions of platelets under rotating magnetic fieldsSoft Matter, 2012
- Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sinteringPolymer Testing, 2012
- An anisotropic rotary diffusion model for fiber orientation in short- and long-fiber thermoplasticsJournal of Non-Newtonian Fluid Mechanics, 2009
- Anisotropic polymer bonded hard-magnetic films for microelectromechanical system applicationsJournal of Applied Physics, 2006
- Anisotropic magnetism in field-structured compositesPhysical Review E, 2000
- Magnetometer for anisotropy measurement using perpendicular magnetizationJournal of Magnetism and Magnetic Materials, 1990
- Temperature Dependence of Ms and K1 of BaFe12O19 and SrFe12O19 Single CrystalsJournal of Applied Physics, 1969