Studies on the Evolution of Fatigue Strength of Aluminium Wires for Overhead Line Conductors
Open Access
Abstract
Traditional ACSR overhead wires, which consist of a high-strength steel core and several layers of aluminium wires, are currently the most popular overhead line conductor (OHL) design globally. Operating conditions, particularly operating under varying stresses from Karman vortices, lead to the fatigue cracking of wires of the outer layer, followed by wires of the inner layers. Karman vortices are formed by the detachment of a laminar wind stream flowing around the conductor, which causes vibrations in the conductor called wind or aeolian oscillations. Aluminium wires are manufactured using standard batch material drawing technology. Although the fatigue strength of such wires is not standardised, there are various criteria for evaluating this characteristic, as well as established limits on the number of cycles needed to break the first wires of the outer layer. Fatigue strength also strongly depends on the geometric structure of the wire and its operating conditions. The article analyses the influence of the mechanical condition of aluminium wires used in ACSR cables on their fatigue strength. We then present results from aluminium wire fatigue tests conducted on a specially constructed test rig. In addition, fatigue cracks were interpreted using scanning microscopy.Keywords
This publication has 21 references indexed in Scilit:
- Fatigue performance of overhead conductors tested under the same value of H/w parameterProcedia Engineering, 2018
- Influence of the catenary parameter (H/w) on the fatigue life of overhead conductorsTribology International, 2017
- Comparative Fatigue Resistance of Overhead Conductors Made of Aluminium and Aluminium Alloy: Tests and AnalysisProcedia Engineering, 2015
- Effect of high mean tensile stress on the fretting fatigue life of an Ibis steel reinforced aluminium conductorInternational Journal of Fatigue, 2012
- Fretting fatigue in overhead conductors: Rig design and failure analysis of a Grosbeak aluminium cable steel reinforced conductorEngineering Failure Analysis, 2009
- On the prediction of high-cycle fretting fatigue strength: Theory of critical distances vs. hot-spot approachEngineering Fracture Mechanics, 2008
- Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safetyInternational Journal of Fatigue, 2007
- Experimental investigations of fatigue cracks nucleation, growth and coalescence in structural steelInternational Journal of Fatigue, 2003
- Fundamental investigations of electrical conductor fretting fatigueTribology International, 1996
- Aeolian vibrations of overhead transmission lines: computation in turbulence conditionsJournal of Wind Engineering and Industrial Aerodynamics, 1993