Evaluation of polymerization of light‐curing hybrid composite resins
- 22 July 2005
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 76B (1) , 106-113
Abstract
The quality of polymerization of hybrid composite resins was tested to explore their feasibility for dental restorations. For this, microhardness, polymerization shrinkage, the coefficient of thermal expansion, and surface morphology were evaluated during or after light curing in conjunction with the thermocycling process. Each product had different microhardness values. The repeated thermal stimulus has no specific effect on the change of microhardness. The difference of microhardness between the thermocycled specimens and specimens stored only in distilled water was minor. The measured microhardness had a linear correlation with the filler content (vol %) of the tested specimens. The polymerization shrinkage had rapidly increased only during the light curing, and then it reached a plateau. Among the specimens, Z250 showed the least amount of shrinkage for all tested thicknesses. Regardless of the product, the shrinkage values increased as the specimens became thick. The coefficient of thermal expansion of the control specimens ranged between 42 and 55 μm/°C in the temperature range of 30–80°C. The coefficient showed an inverse correlation with the filler content. Through the thermocycling process, Palfique Estelite showed randomly propagating cracks on the surface. Larger fillers showed a more apparent detachment than the smaller fillers. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2006Keywords
This publication has 25 references indexed in Scilit:
- Polymerization and light-induced heat of dental composites cured with LED and halogen technologyBiomaterials, 2003
- Light intensity effects on resin-composite degree of conversion and shrinkage strainDental Materials, 2000
- A survey of output intensity and potential for depth of cure among light-curing units in clinical useJournal of Dentistry, 1999
- Polymerization shrinkage and polymerization shrinkage stress in polymer-based restorativesJournal of Dentistry, 1997
- Wear and Marginal Breakdown of Composites with Various Degrees of CureJournal of Dental Research, 1997
- Influence of light intensity on two restorative systemsJournal of Dentistry, 1995
- Correlation of cytotoxicity, filler loading and curing time of dental compositesBiomaterials, 1991
- Marginal Sealing of Curing Contraction Gaps in Class V Composite Resin RestorationsJournal of Dental Research, 1988
- Polymerization shrinkage of methacrylate estersBiomaterials, 1987
- Composite restorative resins: Composition versus wall-to-wall polymerization contractionActa Odontologica Scandinavica, 1975