Partial Incorporation of Nonlinear Resistive Field Grading Materials: A Strategy for Enhanced Field Reduction and Safety
- 16 September 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (1) , 474-483
Abstract
In this study, we fabricate, characterize, and apply nonlinear resistive field grading (NLRFG) materials in vacuum recloser, cable joint, and outdoor cable termination models. The NLRFG materials are fabricated by dispersing various sizes and loadings of zinc oxide (ZnO) nanofillers in polymer matrices including epoxy resin and silicone rubber. The nonlinearly varying resistivity of these materials is characterized by measuring ${I}$ – ${V}$ curves. The ${I}$ – ${V}$ characteristics of the NLRFG materials are modeled and incorporated into a finite element analysis (FEA) platform. The electric field reducing the performance of the fabricated NLRFG composites is analyzed in FEA based on the actual designs of vacuum recloser, cable joint, and outdoor cable termination. Three different case studies are reported: 1) where regular epoxy or regular silicone rubber is used; 2) where NLRFG materials are used; and 3) where NLRFG materials are partially incorporated. The results suggest that 37%, 27%, and 29% reductions in the local maximum electric field are achieved when NLRFG materials are used in the vacuum recloser, cable joint, and outdoor cable termination, respectively. Power loss caused by leakage current in these models is also analyzed. The findings imply that the partial implementation of NLRFG materials not only could be more effective in terms of electric stress reduction but more safe than the full incorporation of them as it prohibits the formation of conductive paths across high-voltage and ground during overvoltage transients that can be caused by lightning strikes.Keywords
Funding Information
- G&W Electric Company
This publication has 39 references indexed in Scilit:
- Tailoring the nonlinear conducting behavior of silicone composites by ZnO microvaristor fillersJournal of Applied Polymer Science, 2015
- Variable stiffness material based on rigid low-melting-point-alloy microstructures embedded in soft poly(dimethylsiloxane) (PDMS)RSC Advances, 2013
- Young's Modulus and Coefficient of Linear Thermal Expansion of ZnO Conductive and Transparent Ultra-Thin FilmsAdvances in Materials Science and Engineering, 2011
- Physical Properties of Composites Near PercolationAnnual Review of Materials Research, 2010
- Electrical conduction in (polyvinyl alcohol/glycogen) blend filmsPolymer Composites, 2008
- Charge transport modeling in insulating polymers: from molecular to macroscopic scaleIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- Non-linear fillers in electrical insulation1996
- Ionic behavior of dc conduction in polyetheretherketoneIEEE Transactions on Dielectrics and Electrical Insulation, 1995
- Electrical conduction at low fields of composites sparsely filled with aluminum particlesIEEE Transactions on Dielectrics and Electrical Insulation, 1995
- Electrical properties of grain boundaries in polycrystalline compound semiconductorsSemiconductor Science and Technology, 1990