OFOmar Faruqe

Omar Faruqe

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Omar Faruqe has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Preventing Partial Discharge in Motor Winding Under Steep Voltage Pulses Using Functional Capacitive Field-Grading Composites

    by Omar Faruqe, Asif Muhammad Juberi, Pradip Chandra Saha, Chanyeop Park

    Power electronic converters (PEC) fed transformers and motor insulation face a considerable challenge from the non-sinusoidal repetitive steep high-voltage pulses leading to premature breakdown. The increased local electric stresses in the winding insulation cause partial discharge (PD), leading to the degradation and aging of the windings. This study investigates functional capacitive field-grading composites (FCFGC) to prevent the incidence of PD. PD tests are conducted on simplified test objects of motor windings, such as twisted pair samples, subjected to steeply rising square voltage waves. The FCFGC materials are fabricated by dispersing ferroelectric Barium Titanate (BTO) powder into Polydimethylsiloxane (PDMS) matrix. The FCFGC demonstrates higher relative permittivity compared to pure PDMS, and this characteristic also shows dependence on the electric field. The current-voltage (IV) characterization reveals that the electric field dependence of the FCFGC increases as the BTO filler contents are raised. PD experiments are carried out using unipolar square waveforms with slew rate as high as 0.22 kV/ns on enameled twisted pair wires. This involves applying a coating of pure PDMS as well as five distinct FCFGC samples with BTO loadings of 10%, 20%, 30%, 40%, and 50%. Experimental findings indicate that FCFGCs can reduce PD magnitudes and enhance Partial Discharge Inception Voltage (PDIV) compared to neat PDMS insulation. Increasing the BTO filler loading reduces PD magnitudes and increases the PDIV by 2.68 times (i.e., 168%). Additionally, numerical models are employed to conduct electric field analyses of the twisted pair experiments. These models incorporate the field-dependent permittivity of the FCFGC characterized experimentally, providing a more comprehensive understanding of the experimental outcomes.


  • Mitigating Partial Discharge at Low Pressures Using Electrets for All-Electric Aircraft

    by Pradip Chandra Saha, Asif Muhammad Juberi, Omar Faruqe, Chanyeop Park

    High electric fields generate partial discharges (PDs) that degrade electrical insulators at an accelerated rate, posing a greater risk to system reliability. PD can be mitigated by neutralizing the high electric fields using electrets, which create their own electric fields independently. Our previous studies have explored the effectiveness of electrets in mitigating PD under recurrent, steep voltage pulses at high temperatures. However, the mitigation of PD using electrets at low pressures and high temperatures remains unexplored. In this study, we demonstrate that Parylene high temperature (HT) thin-film electrets effectively mitigate PD at low pressures and high temperatures. We measured PD under steep square voltage pulses with slew rates as high as 68.75 V/ns, at pressures as low as 20 kPa, and at temperatures up to $260~^{\circ }$ C. The results indicate that Parylene thin-film electrets can reduce PD magnitude and increase PD inception voltage (PDIV) in harsh electrical and thermal conditions at low pressures.


  • Partial Discharge Characteristics of SiO₂/Si₃N₄ Electret Incorporated AlN Substrates

    by Asif Muhammad Juberi, Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    Partial discharge (PD) is one of the main reasons for the degradation of dielectric material and insulation of power semiconductors and systems they drive. Subsequently, it is a challenge for the electrification of transportation systems, including ships. In recent years, electret, which can generate an electric field without an external voltage source, has been used to mitigate PD. Research on electrets shows fabricating and employing electrets to counteract locally concentrated high electric fields and mitigate PD under recurrent, steep voltage pulses generated by wide bandgap (WBG) power semiconductors. In most of the studies that used electret material to mitigate PD, it was coated on a metal substrate. However, in our study, we used a thin 520 nm SiO 2 /Si 3 N 4 double-layer electret on a ceramic substrate made of aluminum nitride (AlN) instead of metal. PD was measured under steep square voltage pulses with slew rates as high as 131.25 V/ns and at temperatures as high as 180°C. We measured PD magnitude and partial discharge inception voltage (PDIV). The results indicate that AlN substrates coated with SiO 2 /Si 3 N 4 thin film electrets can reduce PD magnitude and increase PDIV in harsh electrical and thermal conditions.


  • Preventing Space-Charge-Induced Breakdown Using Electrets at Various Temperatures

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    In medium voltage direct current (MVDC) systems, charge carriers gradually inject into the bulk of a dielectric, leading to space charge accumulation. As more charge carriers inject and accumulate, the effective thickness of a dielectric decreases, reducing the breakdown voltage. This phenomenon intensifies at high temperatures. Our previous research has demonstrated the effectiveness of electrets in mitigating space charge accumulation and space-charge-induced breakdown in dielectric materials via electric field neutralization. However, the impacts of high temperatures have yet to be investigated. This study employs the electret-based electric field neutralization approach to prevent space-charge-induced breakdown at higher temperatures. We peformed numerical analysis using bipolar charge transport models at various temperatures to estimate the effects of using electrets. Then we performed experiments, including instantaneous and delayed breakdown measurements at three different temperatures: 25°C, 50°C, and 75°C. The results of this study demonstrate that electrets effectively prevent charge carrier injection and space-charge-induced breakdown at elevated temperatures.


  • Mitigating Partial Discharge Caused by Steep Voltage Pulses at High Temperatures

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    Electrets are dielectric materials that generate electric fields without a voltage source. Our previous studies reported how one could design, fabricate, and utilize electrets to neutralize locally concentrated high electric fields and mitigate partial discharge (PD) in power electronics systems. While the polymer-based electrets used in our prior work demonstrated impressive performance in reducing PD magnitude and rate under recurring, steep voltage transients, the low operating temperature of these materials remained a significant challenge. In this study, we report that inorganic thin film electrets can mitigate PD at high temperatures. This paper reports PD measured under steep square voltage pulses with slew rates as high as 75 V/ns and at temperatures as high as 245°C. The results demonstrate that the inorganic thin film electrets can decrease PD magnitude and increase partial discharge inception voltage (PDIV) in harsh electrical and thermal conditions.


  • Increasing Partial Discharge Inception Voltage at High Temperatures Using Parylene HT Electrets

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    Electrets are dielectric materials that generate electric fields independently, without an external voltage source. Our previous studies elucidated the process of designing, fabricating, and employing electrets to counteract locally concentrated high electric fields and mitigate partial discharge (PD) under recurrent, steep voltage pulses. Despite the remarkable performance of the PVDF-based electrets reported in our previous research, the limited temperature range of PVDF remains a significant challenge. To overcome this challenge, this study employs Parylene HT thin film electrets and demonstrates PD mitigation at elevated temperatures. We measured PD under steep square voltage pulses with slew rates as high as 75 V/ns and at temperatures as high as 260°C. The results indicate that Parylene thin film electrets can reduce PD magnitude and increase partial discharge inception voltage (PDIV) in harsh electrical and thermal conditions.


  • Preventing Space-Charge-Induced Breakdown in MVDC Systems by Electric Field Cancellation

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    In medium voltage direct current (MVDC) systems, charge carriers inject into solid insulators, accumulate, and form space charge that distorts electric fields and reduces the effective thickness of dielectric materials. This study proposes an electric field canceling approach to mitigate space charge injection, accumulation, and space-charge-induced dielectric issues. We employ electret films that generate an electric field that counters the system electric field at metal-dielectric interfaces to prevent charge carriers from flowing into electrical insulators. For numerical analysis, a bipolar charge transport model is employed to simulate space charge injection and accumulation behaviors in polyvinylidene fluoride (PVDF) without and with the incorporation of electret films at the interface. Subsequently, instantaneous and delayed breakdown experiments are conducted to validate the results of the numerical analyses. Both results show that electret films hold the charge injection barrier high, thereby reducing space charge injection and increasing dielectric strength. The results of this work demonstrate that electret films can mitigate space charge accumulation and enhance the dielectric integrity of MVDC power systems.


  • Partial Incorporation of Nonlinear Resistive Field Grading Materials: A Strategy for Enhanced Field Reduction and Safety

    by Omar Faruqe, Farhina Haque, Pradip Chandra Saha, Ivan Jovanovic, Nenad Uzelac, Chanyeop Park

    In this study, we fabricate, characterize, and apply nonlinear resistive field grading (NLRFG) materials in vacuum recloser, cable joint, and outdoor cable termination models. The NLRFG materials are fabricated by dispersing various sizes and loadings of zinc oxide (ZnO) nanofillers in polymer matrices including epoxy resin and silicone rubber. The nonlinearly varying resistivity of these materials is characterized by measuring ${I}$ – ${V}$ curves. The ${I}$ – ${V}$ characteristics of the NLRFG materials are modeled and incorporated into a finite element analysis (FEA) platform. The electric field reducing the performance of the fabricated NLRFG composites is analyzed in FEA based on the actual designs of vacuum recloser, cable joint, and outdoor cable termination. Three different case studies are reported: 1) where regular epoxy or regular silicone rubber is used; 2) where NLRFG materials are used; and 3) where NLRFG materials are partially incorporated. The results suggest that 37%, 27%, and 29% reductions in the local maximum electric field are achieved when NLRFG materials are used in the vacuum recloser, cable joint, and outdoor cable termination, respectively. Power loss caused by leakage current in these models is also analyzed. The findings imply that the partial implementation of NLRFG materials not only could be more effective in terms of electric stress reduction but more safe than the full incorporation of them as it prohibits the formation of conductive paths across high-voltage and ground during overvoltage transients that can be caused by lightning strikes.


  • Effects of Fabrication Conditions on the Partial Discharge Mitigation Performance of Electrets for Power Electronic Driven Systems

    by Farhina Haque, Omar Faruqe, Chanyeop Park

    In our previous studies, we have shown that electrets can be designed to mitigate partial discharge (PD) in power electronic converter (PEC)-driven systems by neutralizing locally-enhanced harmful electric fields. Surface charge density is one of the main factors that determines the PD mitigation performance of electrets. In this study, we fabricate electrets from polyvinylidene fluoride (PVDF) films under various charging conditions including voltage magnitude, charging duration, voltage polarity, and temperature using triode-corona discharge method. The surface charge density and PD mitigation performance of the fabricated electret films are assessed by surface potential measurements and PD experiments. The effects of fabrication temperature on electret surface charge stability, and the impacts of atmospheric conditions on electret surface charge density and PD magnitude are discussed. This study provides knowledge that is essential for establishing the fabrication conditions of electrets that can effectively mitigate PD in PEC-driven systems.