Processing and mechanical characterization of Al2O3/Ni and Al2O3/C0 composites by pressureless sintering of nanocomposite powders
Open Access
- 1 January 2018
- journal article
- Published by National Library of Serbia in Processing and Application of Ceramics
- Vol. 12 (2) , 123-128
Abstract
Al2O3/Ni and Al2O3/Co nanopowder mixtures (with 3 vol.% of metallic phase) were synthesized by heterogeneous precipitation method. In order to increase the green strength, polypropylene carbonate (PPC) was used as a binder while preparing green compacts. Uniaxially pressed powder mixtures were sintered at 1550°C for 2 h in a reducing atmosphere. The effects of Ni and Co nanophases on the microstructure and mechanical properties of Al2O3 ceramics were studied by X-ray diffraction, scanning electron microscopy, Vickers indentation technique and three-point bending tests. The metallic phase hindered the densification of alumina matrix, yet hardness values of Al2O3, Al2O3/Ni, and Al2O3/Co composites were comparable. Vickers fracture toughness results indicate that the composites have higher fracture toughness, but the characteristic flexural strength and Weibull modulus are higher for the pure Al2O3.Keywords
This publication has 23 references indexed in Scilit:
- Pressureless sintering of Al 2 O 3 /Ni nanocomposites produced by heterogeneous precipitation method with varying nickel contentsInternational Journal of Refractory Metals and Hard Materials, 2016
- Flexural Strength and Weibull Analysis of Bulk Metallic GlassesJournal of Materials Science & Technology, 2016
- Weibull distribution of the fracture strength of 99% alumina ceramic reshaped by cold isostatic pressingCeramics International, 2014
- The preparation of core–shell Al2O3/Ni composite powders by electroless platingCeramics International, 2013
- Effect of Microstructure of Composite Powders on Microstructure and Properties of Microwave Sintered Alumina Matrix CeramicsJournal of Materials Science & Technology, 2013
- Stochastic failure of isotropic, brittle materials with uniform porosityActa Materialia, 2013
- Effects of Fe–Ni alloy nanoparticles on the mechanical properties and microstructures of Al2O3/Fe–Ni nanocomposites prepared by rapid sinteringCeramics International, 2012
- Sliding wear behaviour of alumina/nickel nanocomposites processed by a conventional sintering routeJournal of the European Ceramic Society, 2011
- Preparation and properties of Al2O3/Ni composite from NiAl2O4 spinel by in situ reaction sintering methodCeramics International, 2007
- Microstructure and mechanical properties of Al2O3/Ni compositesCeramics International, 2004