Effects of Reynolds Number on the Overall Characteristics of Flow and Heat Transfer in the Long Micro-Tube with Dimples
Open Access
- 14 December 2022
- Vol. 10 (12) , 2696
Abstract
The flow and heat transfer characteristics in micro-tube are very important research fields. In order to study the influence of the Reynolds number on the overall characteristics of flow and heat transfer, a 510 mm long micro-tube with dimples was constructed. Thirty-five different working conditions are considered, and the Reynolds number is between 1500 and 8100. At the same time, the change of physical properties of coolant with temperature is considered. The reliability of numerical simulation results is verified by the grid independence verification and the comparison of experimental data. The results show that the dimple will promote the instability of the flow state and improve the heat transfer efficiency. The flow state evolution formed in the stream-wise direction is basically similar, and its fully developed position remains at 76 mm, which is independent of the Reynolds number. For the fully developed region, the partial derivation of static pressure in the stream-wise component has a quasi-linear relationship with the stream-wise direction. With the development in the stream-wise direction, the partial derivation of static temperature in the steam-wise component decreases. With the increase of Reynolds number, the friction factor f and heat transfer factor j decrease. The ratio of factor heat transfer f to Reynolds number relative collapses for the different cases, especially when the Reynolds number is larger than 3800. The heat transfer factor j is an exponential function of the Reynolds number and decreases with the increased Reynolds number.Keywords
Funding Information
- National Natural Science Foundation of China (51976198, 2021Y001)
- Fundamental Research Funds of Zhejiang Sci-Tech University (51976198, 2021Y001)
This publication has 30 references indexed in Scilit:
- Mechanics of drag reduction by shallow dimples in channel flowPhysics of Fluids, 2015
- Experimental and Numerical Study of Heat Transfer and Flow Friction in Channels With Dimples of Different ShapesJournal of Heat Transfer, 2015
- Influence of the Reynolds number and the spherical dimple depth on turbulent heat transfer and hydraulic loss in a narrow channelInternational Journal of Heat and Mass Transfer, 2010
- Fluid Flow and Heat Transfer in Curved Tubes with Temperature-Dependent PropertiesIndustrial & Engineering Chemistry Research, 2007
- Laminar Flow and Heat Transfer in the Entrance Region of Trapezoidal Channels With Constant Wall TemperatureJournal of Heat Transfer, 2005
- Experimental investigation of heat-transfer characteristics of aluminum-foam heat sinksInternational Journal of Heat and Mass Transfer, 2004
- Effects Of Dimple Depth on Channel Nusselt Numbers and Friction FactorsJournal of Heat Transfer, 2004
- Flow structure and local Nusselt number variations in a channel with dimples and protrusions on opposite wallsInternational Journal of Heat and Mass Transfer, 2001
- Flow structure due to dimple depressions on a channel surfacePhysics of Fluids, 2001
- Numerical study of laminar heat transfer with temperature dependent fluid viscosity in a 2:1 rectangular ductInternational Journal of Heat and Mass Transfer, 1993