Towards better correlation between optical and commercial spark ignition engines through quasi-dimensional modeling of cycle-to-cycle variability
Open Access
- 1 January 2022
- journal article
- research article
- Published by National Library of Serbia in Thermal Science
- Vol. 26 (2 Part C) , 1685-1694
Abstract
Internal combustion engines are still the main choice when considering propulsion technology in the transport sector. Spark ignition units offer the advantage of good efficiency with simpler after-treatment systems. Lean operation is a promising strategy that would further improve efficiency, but requires mitigation of cycle-to-cycle variability. Within this context, and given the increasing trend of using simulation based evaluations during engine development, the current work investigated combustion in an optical spark ignition engine through measurements and quasi-dimensional simulation. The possibility of visualizing in-cylinder processes provides unique insight, but also introduces complications with respect to commercial engines. For this reason, quasi-dimensional simulation was applied so as to better understand the factors that induce cycle-to-cycle variability. For the specific case of the investigated engine, cycle-to-cycle measured exhaust air-fuel ratio was found to be directly correlated to variations of engine output. Several routes of incorporating these effects into simulations were evaluated. Introducing a random component in the period of laminar-turbulent flame transition was found to ensure good grounds for simulating peak pressure variability. Indicated mean effective pressure on the other hand was found to depend less on the initial stages of combustion and was strongly correlated to aforementioned variability of exhaust air-fuel ratio.Keywords
This publication has 24 references indexed in Scilit:
- Knocking combustion in spark-ignition enginesProgress in Energy and Combustion Science, 2017
- Effect of Fuel Injection Strategy on the Carbonaceous Structure Formation and Nanoparticle Emission in a DISI Engine Fuelled with ButanolEnergies, 2017
- Estimation of operational parameters for a direct injection turbocharged spark ignition engine by using regression analysis and artificial neural networkThermal Science, 2017
- Integral Length Scales and Time Scales of Turbulence in an Optical Spark-Ignition EngineFlow, Turbulence and Combustion, 2016
- A Real-Time Model for Spark Ignition Engine Combustion Phasing PredictionSAE International Journal of Engines, 2016
- Application of an entrainment turbulent combustion model with validation based on the distribution of chemical species in an optical spark ignition engineApplied Energy, 2016
- Penetration of the Flame Into the Top-Land Crevice - Large-Eddy Simulation and Experimental High-Speed VisualizationSAE International Journal of Advances and Current Practices in Mobility, 2015
- Internal combustion engines: Progress and prospectsRenewable and Sustainable Energy Reviews, 2014
- Development of a two zone turbulence model and its application to the cycle-simulationThermal Science, 2014
- Multi-zone thermodynamic modelling of spark-ignition engine combustion – An overviewEnergy Conversion and Management, 2009