Production of Ceramic Materials Using only Waste as Raw Materials
- 1 September 2015
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 663, 62-71
Abstract
From a selection of inorganic industrial waste (screen glass, steelworks ashes, coal power plant ashes, biomass power plant ash and sludge from cutting marble industry) and a waste with organic fraction (diatomaceous earth from oil filtration) it is expected to obtain ceramic materials with properties similar to those of ceramic materials used in construction and porous materials with thermal insulating capability. The ternary phase equilibrium diagram SiO2-Al2O3-CaO has been used as the main tool for the formulation of these materials. The dynamic sintering study was carried out using dilatometry techniques (DIL), thermo gravimetric analysis and differential scanning calorimetry (TG-DSC). Characterization of the manufactured material allows determining a set of basic technological properties such as fired bulk density, water absorption capacity and bending strength, in addition to thermal conductivity and microstructure by SEM-EDX, in order to obtain the necessary data to determine technical feasibility.Keywords
This publication has 16 references indexed in Scilit:
- Influence of waste addition on the porosity of clay-based ceramic membranesDesalination and Water Treatment, 2016
- Fabrication and characterization of glass–ceramics materials developed from steel slag wasteMaterials & Design (1980-2015), 2012
- Utilisation of different types of coal fly ash in the production of ceramic tilesBoletín de la Sociedad Española de Cerámica y Vidrio, 2012
- Recycling PC and TV waste glass in clay bricks and roof tilesWaste Management, 2009
- Characteristics of acid resisting bricks made from quarry residues and waste steel slagConstruction and Building Materials, 2008
- The use of the powder marble by-product to enhance the properties of brick ceramicConstruction and Building Materials, 2007
- CRT glass state of the artJournal of the European Ceramic Society, 2007
- Glass-ceramic materials from electric arc furnace dustJournal of Hazardous Materials, 2007
- Las escorias de la central térmica GICC ELCOGAS como materia prima para la síntesis de materiales vitrocerámicos. Parte 2: Síntesis y caracterización de los materiales vitrocerámicosBoletín de la Sociedad Española de Cerámica y Vidrio, 2006
- Characteristics of bricks made from waste steel slagWaste Management, 2004