Field tests and interpretation of screw micropiles subjected to axial loading in cohesive soil
Authors:
- 13 May 2021
- journal article
- research article
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 16 (4) , 391-399
Abstract
Screw micropiles consist of a steel shaft with continuous threads and a threaded tapered tip; the shaft diameter is generally 66–140 mm and the length is 1.0–3.0 m. Screw micropiles are installed by rotary driving, without drilling and grouting, and can be employed in the construction of light structures, houses, photovoltaic power plants, road and railway barriers etc. The literature on this type of foundation is limited and the present paper reports additional findings derived from an ongoing research on screw micropiles subjected to axial loading. In a test field in Italy, 22 new tests were conducted on three models of micropiles with different diameters, lengths and taper angles; tests were conducted with two different procedures. The results confirmed the possibility of computing the ultimate capacity of screw micropiles with appropriate analytical methods, highlighting the influence of the taper angle and the effect of the testing procedure on the observed response.Keywords
This publication has 10 references indexed in Scilit:
- Field axial cyclic loading tests of screw micropiles in cohesionless soilSoil Dynamics and Earthquake Engineering, 2021
- Behaviour of screw micropiles subjected to axial tensile and compressive loadingInternational Journal of Geotechnical Engineering, 2019
- Field loading tests of screw micropiles under axial cyclic and monotonic loadsActa Geotechnica, 2018
- Field behaviour of screw micropiles subjected to axial loading in cohesive soilsCanadian Geotechnical Journal, 2018
- Analysis and design methods of screw piles: A reviewSoils and Foundations, 2016
- Axial compressive response of large-capacity helical and driven steel piles in cohesive soilCanadian Geotechnical Journal, 2015
- Ultimate Uplift Capacity of Multiplate Helical Type Anchors in ClayJournal of Geotechnical and Geoenvironmental Engineering, 2011
- Loading Rate Effect on Piles in Clay from Laboratory Model TestsJournal of King Saud University – Engineering Sciences, 2001
- Influence of loading rate on the capacity of a model pile in clayCanadian Geotechnical Journal, 1995
- Behaviour of embedded model screw anchors in soft claysGéotechnique, 1993