Alex Sanzeni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alex Sanzeni has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Francesco Colleselli
Department of Civil Engineering, University of Brescia, Brescia, Italy
3 shared publications - Stefano Barontini
Università degli Studi di Brescia
3 shared publications Emanuele Giuseppe Danesi
Department of Civil, Environmental, Architectural Engineering and Mathematics, Università Degli Studi Di Brescia, DICATAM, Brescia, Italy
2 shared publicationsFrancesco Colleselli
Università degli Studi di Brescia
2 shared publicationsJohn T. Germaine
Senior Research Associate, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
2 shared publications- Marco Peli
DICATAM, Università degli Studi di Brescia, Brescia, Italy
2 shared publications
Latest Publications
- 23 December 2021
- Published by Pleiades Publishing Ltd in Eurasian Soil Science
- Vol. 54 (12) , 1935-1944
Seasonality of Earthworm Macropores in a Temperate Alpine Area
From 9 March 2016 to 12 November 2018 we conducted an intensive experimental field campaign, the WormEx I Experiment, to quantitatively assess the seasonality of the earthworm macropores and their effect on the soil hydrological properties in a temperate mountain range. Six 1-m2 plots were selected in two shallow soils in Valle Camonica (Central Italian Alps) at an elevation of 274 and 935 m a.s.l., in order to count the earthworm macropores. Two plots were amended with calcium trioxocarbonate to stimulate the digging activity. In this work we present results regarding the seasonality of earthworm macropores, its correlation with the antecedent meteorological conditions and the effectiveness of calcium trioxocarbonate. Earthworm activity showed a marked seasonality with Winter hibernation and medium or great digging activity during all the other seasons. A relevant peak of Summer and Autumn macropores was detected in the site at 935 m a.s.l.. The castings number resulted very well positively correlated to the antecedent air temperature in both sites. It resulted correlated to the antecedent precipitation, with increasing Pearson’s coefficient at increasing time window in the range from 1 day to 8 weeks. Also, it resulted very well positively correlated to the antecedent average soil water content in a range from 1 to 4 days. Finally, the calcium trioxocarbonate proved to be effective at stimulating the earthworm digging activity.
- 23 December 2021
- Published by Pleiades Publishing Ltd in Eurasian Soil Science
- Vol. 54 (12) , 1935-1944
Seasonality of Earthworm Macropores in a Temperate Alpine Area
From 9 March 2016 to 12 November 2018 we conducted an intensive experimental field campaign, the WormEx I Experiment, to quantitatively assess the seasonality of the earthworm macropores and their effect on the soil hydrological properties in a temperate mountain range. Six 1-m2 plots were selected in two shallow soils in Valle Camonica (Central Italian Alps) at an elevation of 274 and 935 m a.s.l., in order to count the earthworm macropores. Two plots were amended with calcium trioxocarbonate to stimulate the digging activity. In this work we present results regarding the seasonality of earthworm macropores, its correlation with the antecedent meteorological conditions and the effectiveness of calcium trioxocarbonate. Earthworm activity showed a marked seasonality with Winter hibernation and medium or great digging activity during all the other seasons. A relevant peak of Summer and Autumn macropores was detected in the site at 935 m a.s.l.. The castings number resulted very well positively correlated to the antecedent air temperature in both sites. It resulted correlated to the antecedent precipitation, with increasing Pearson’s coefficient at increasing time window in the range from 1 day to 8 weeks. Also, it resulted very well positively correlated to the antecedent average soil water content in a range from 1 to 4 days. Finally, the calcium trioxocarbonate proved to be effective at stimulating the earthworm digging activity.
- 13 May 2021
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 16 (4) , 391-399
Field tests and interpretation of screw micropiles subjected to axial loading in cohesive soil
Screw micropiles consist of a steel shaft with continuous threads and a threaded tapered tip; the shaft diameter is generally 66–140 mm and the length is 1.0–3.0 m. Screw micropiles are installed by rotary driving, without drilling and grouting, and can be employed in the construction of light structures, houses, photovoltaic power plants, road and railway barriers etc. The literature on this type of foundation is limited and the present paper reports additional findings derived from an ongoing research on screw micropiles subjected to axial loading. In a test field in Italy, 22 new tests were conducted on three models of micropiles with different diameters, lengths and taper angles; tests were conducted with two different procedures. The results confirmed the possibility of computing the ultimate capacity of screw micropiles with appropriate analytical methods, highlighting the influence of the taper angle and the effect of the testing procedure on the observed response.
- 13 May 2021
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 16 (4) , 391-399
Field tests and interpretation of screw micropiles subjected to axial loading in cohesive soil
Screw micropiles consist of a steel shaft with continuous threads and a threaded tapered tip; the shaft diameter is generally 66–140 mm and the length is 1.0–3.0 m. Screw micropiles are installed by rotary driving, without drilling and grouting, and can be employed in the construction of light structures, houses, photovoltaic power plants, road and railway barriers etc. The literature on this type of foundation is limited and the present paper reports additional findings derived from an ongoing research on screw micropiles subjected to axial loading. In a test field in Italy, 22 new tests were conducted on three models of micropiles with different diameters, lengths and taper angles; tests were conducted with two different procedures. The results confirmed the possibility of computing the ultimate capacity of screw micropiles with appropriate analytical methods, highlighting the influence of the taper angle and the effect of the testing procedure on the observed response.
- 3 October 2019
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 16 (4) , 450-461
Behaviour of screw micropiles subjected to axial tensile and compressive loading
Screw micropiles or “ground screws” (diameter less than 200 mm, length less than 5 m) consist of a steel tubular shaft with continuous spiral threads, and a threaded tapered segment; the installation is achieved by rotary driving. Although ground screws are useful in many applications as well as environment-friendly, research on their behaviour is limited. The paper presents an experimental study on the response of screw micropiles subjected to tensile and compressive axial loading. Twenty full-scale load tests were conducted on four types of screws, with diameter 66-114 mm and length 0.8-1.6 m, at a test site in Italy, characterized by the presence of predominantly clayey soils. The micropiles achieved tensile and compressive capacities of 23-60 kN and 20-75 kN respectively, with pile movements in the range 1-9 mm. The results were interpreted in the light of a recently developed method to compute bearing capacity of screw micropiles.
- 3 October 2019
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 16 (4) , 450-461
Behaviour of screw micropiles subjected to axial tensile and compressive loading
Screw micropiles or “ground screws” (diameter less than 200 mm, length less than 5 m) consist of a steel tubular shaft with continuous spiral threads, and a threaded tapered segment; the installation is achieved by rotary driving. Although ground screws are useful in many applications as well as environment-friendly, research on their behaviour is limited. The paper presents an experimental study on the response of screw micropiles subjected to tensile and compressive axial loading. Twenty full-scale load tests were conducted on four types of screws, with diameter 66-114 mm and length 0.8-1.6 m, at a test site in Italy, characterized by the presence of predominantly clayey soils. The micropiles achieved tensile and compressive capacities of 23-60 kN and 20-75 kN respectively, with pile movements in the range 1-9 mm. The results were interpreted in the light of a recently developed method to compute bearing capacity of screw micropiles.
- 3 August 2019
- Published by Springer Nature in Landslides
- Vol. 16 (11) , 2277-2286
Modelling of an accidentally triggered shallow landslide in Northern Italy
- 3 August 2019
- Published by Springer Nature in Landslides
- Vol. 16 (11) , 2277-2286
Modelling of an accidentally triggered shallow landslide in Northern Italy
- 23 June 2019
- Published by Springer Nature
- p. 630-639
Field Tests on Screw Micropiles Under Axial Loading
- 23 June 2019
- Published by Springer Nature
- p. 630-639
Field Tests on Screw Micropiles Under Axial Loading
- 11 June 2017
- Published by Springer Nature
- p. 541-549
Back-Analysis of an Artificially Triggered Landslide: A Case Study in Northern Italy
- 11 June 2017
- Published by Springer Nature
- p. 541-549
Back-Analysis of an Artificially Triggered Landslide: A Case Study in Northern Italy
- 19 May 2014
- Published by Taylor & Francis
- p. 795-800
Ground movement induced by a deep excavation in the historic center of Brescia
- 19 May 2014
- Published by Taylor & Francis
- p. 795-800
Ground movement induced by a deep excavation in the historic center of Brescia
- 1 October 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 139 (10) , 1828-1832
Specific Surface and Hydraulic Conductivity of Fine-Grained Soils
The Kozeny-Carman (K-C) equation can be used to predict the saturated hydraulic conductivity of a soil, provided enough information is given regarding the porosity and the specific surface. The main limitation of the K-C equation lays in the determination of the specific surface of the soil, a parameter that is not regularly measured but can be estimated with analytical or empirical relations. A method to evaluate the soil’s specific surface is proposed, which combines the contribution of the plastic clayey fraction and that of the granular silty-sandy particles. The applicability of the proposed method and its effect on the performance of the K-C equation have been verified by comparing the K-C estimated hydraulic conductivity with the result of approximately 130 hydraulic conductivity tests on saturated soil specimens in the triaxial apparatus. The results show that the K-C equation and the method for estimating the specific surface predict within an order of magnitude the saturated hydraulic co...
- 1 October 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 139 (10) , 1828-1832
Specific Surface and Hydraulic Conductivity of Fine-Grained Soils
The Kozeny-Carman (K-C) equation can be used to predict the saturated hydraulic conductivity of a soil, provided enough information is given regarding the porosity and the specific surface. The main limitation of the K-C equation lays in the determination of the specific surface of the soil, a parameter that is not regularly measured but can be estimated with analytical or empirical relations. A method to evaluate the soil’s specific surface is proposed, which combines the contribution of the plastic clayey fraction and that of the granular silty-sandy particles. The applicability of the proposed method and its effect on the performance of the K-C equation have been verified by comparing the K-C estimated hydraulic conductivity with the result of approximately 130 hydraulic conductivity tests on saturated soil specimens in the triaxial apparatus. The results show that the K-C equation and the method for estimating the specific surface predict within an order of magnitude the saturated hydraulic co...
- 24 May 2013
- Published by Taylor & Francis
- p. 699-705
Design, installation and performance of containment system at a petroleum-release site
- 24 May 2013
- Published by Taylor & Francis
- p. 699-705
Design, installation and performance of containment system at a petroleum-release site
- Open Access
- 1 October 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 138 (10) , 1266-1276
Compression and Creep of Venice Lagoon Sands
A laboratory test program was conducted to evaluate the one-dimensional (1D) compression and creep properties of intact sand (and silty-sand) samples from a deep borehole at the Malamocco Inlet to the Venice Lagoon. The tests were performed with a constant rate of strain consolidometer and included special procedures for trimming the frozen samples and measuring strains during thawing and backpressure saturation. The specimens had variable fine fractions ranging from 6 to 21% and mica contents ranging from 1 to 10%. The results confirmed that there is a strong correlation between the creep rate coefficient and the compressibility index and between the swelling index and mica content. The compression behavior in all tests is well described by a nonlinear compression model with a unique limiting compression curve and a variable transition parameter that reflects the fines and mica content. Creep tests performed at different confining pressures are also well represented by a simple two-parameter model.
- 1 October 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 138 (10) , 1266-1276
Open AccessCompression and Creep of Venice Lagoon Sands
A laboratory test program was conducted to evaluate the one-dimensional (1D) compression and creep properties of intact sand (and silty-sand) samples from a deep borehole at the Malamocco Inlet to the Venice Lagoon. The tests were performed with a constant rate of strain consolidometer and included special procedures for trimming the frozen samples and measuring strains during thawing and backpressure saturation. The specimens had variable fine fractions ranging from 6 to 21% and mica contents ranging from 1 to 10%. The results confirmed that there is a strong correlation between the creep rate coefficient and the compressibility index and between the swelling index and mica content. The compression behavior in all tests is well described by a nonlinear compression model with a unique limiting compression curve and a variable transition parameter that reflects the fines and mica content. Creep tests performed at different confining pressures are also well represented by a simple two-parameter model.