Experimental investigation on a solar parabolic trough receiver tube enhanced by toroidal rings
- 28 December 2021
- journal article
- research article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 46 (5) , 6637-6653
Abstract
The experimental investigation with the incorporation of toroidal rings in an absorber tube of a lab-scale solar parabolic trough collector is carried out in the present study. Five different cases of the absorber tube including the reference smooth absorber tube and the absorber incorporated with 2, 4, 6 and 8 mm thick toroidal rings are investigated. The influence of performance parameters like thermal efficiency, heat loss, thermal enhancement index and so on with different absorber tube configurations are evaluated, compared and illustrated to determine the best case. The outcomes indicate that the absorber tube with 6 and 8 mm thick toroidal rings are the best cases, with the 8 mm case exhibiting a higher exergy efficiency in the range of 38.57%-24.64%. The thermal efficiency for the best absorber cases is found to be 69.43% and 70.34% with the pressure drop being 1.67 and 0.93 kPa, respectively. Also, the cost of heat gain produced with the efficient absorber case is seen to be ₹ 3.43/kWh (US$ 0.045/kWh and € 0.040/kWh), which is nearly 15.51% lower than the reference case. Hence, the incorporation of toroidal rings could be effectively utilized in a large-scale solar thermal system for improved thermal performance.Keywords
Funding Information
- Anna University (CFR/ACRF‐2018/AR1/4)
This publication has 35 references indexed in Scilit:
- Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate insertsApplied Thermal Engineering, 2015
- Thermal performance of a novel linear cavity absorber for parabolic trough solar concentratorEnergy Conversion and Management, 2015
- A numerical study of parabolic trough receiver with nonuniform heat flux and helical screw-tape insertsEnergy, 2014
- Experimental and numerical heat transfer analysis of a V-cavity absorber for linear parabolic trough solar collectorEnergy Conversion and Management, 2014
- Estimation of the temperature, heat gain and heat loss by solar parabolic trough collector under Algerian climate using different thermal oilsEnergy Conversion and Management, 2013
- Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receiversInternational Journal of Heat and Mass Transfer, 2012
- A technical note on application of internally finned tubes in solar parabolic trough absorber pipesSolar Energy, 2011
- Exergy of undiluted thermal radiationSolar Energy, 2003
- Performance comparison of some tube insertsInternational Communications in Heat and Mass Transfer, 2002
- A cylindrical blackbody solar energy receiverSolar Energy, 1976