Influence of cavitation on vortical structures and energy loss in a waterjet pump
Authors:
- Bo GongBGBo Gong
- Chao FengCFChao Feng
- Ning LiNLNing Li
- Xiaoping OuyangXOXiaoping Ouyang
- Junlian YinJYJunlian Yin
- Dezhong WangDWDezhong Wang
- 1 March 2024
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Abstract
Cavitation-induced vortex and energy loss are critical topics in the field of hydraulic machinery. Through a combination of experimental and numerical analysis, this paper investigates how blade loading affects vortical structures and energy loss during cavitation in a waterjet pump. The flow rate and cavitation conditions changed blade tip pressure loading, which significantly affected the trajectories of the primary tip leakage vortex cavitation and secondary tip leakage vortex cavitation. A considerable pressure gradient at the attached cavity closure region leads to a wall reentrant jet and a side-entrant jet, resulting in an attached vortex under the cavitation developing stage and severe stage. The development of the attached vortex leads to the shedding of attached cavities. Furthermore, the blade tip pressure difference loading significantly alters the distribution of tip leakage vortex and gives rise to a perpendicular leakage vortex (PLV). The PLV entrains the shedding cavities and forms a perpendicular cavitation vortex. These complex vortical structures induced by cavitation inevitably enhance enstrophy and lead to entropy production in the pump. The entropy production terms of viscous dissipation, turbulent dissipation, and the wall effect react differently to the development of cavitation. As the cavitation stages developed and became more severe, wall entropy production (S3) decreased. While turbulent dissipative entropy production S2 due to mixing losses occurring in the tip region increased sharply, which dominates the total entropy production S and results in an increase in S.Keywords
Funding Information
- National Natural Science Foundation of China (52276158)
This publication has 59 references indexed in Scilit:
- Experimental investigation of characteristics of tip leakage vortex cavitation-induced vibration of a pumpAnnals of Nuclear Energy, 2023
- Aerodynamic optimization and analysis of quadrotor blades operating in the Martian atmosphereAerospace Science and Technology, 2022
- Dynamic behaviors of blade cavitation in a water jet pump with inlet guide vanes: Effects of inflow non-uniformity and unsteadinessApplied Ocean Research, 2021
- Effect of blade thickness on rotating stall of mixed-flow pump using entropy generation analysisEnergy, 2021
- Anisotropic SST turbulence model for shock-boundary layer interactionComputers & Fluids, 2021
- Energy characteristics of mixed-flow pump under different tip clearances based on entropy production analysisEnergy, 2020
- Clocking effect of vaned diffuser on hydraulic performance of high-power pump by using the numerical flow loss visualization methodEnergy, 2019
- Assessment of the modified rotation/curvature correction SST turbulence model for simulating swirling reacting unsteady flows in a solid-fuel ramjet engineActa Astronautica, 2016
- Partload operation, impact of 3-D flow phenomena performance2007
- A compressible three‐dimensional design method for radial and mixed flow turbomachinery bladesInternational Journal for Numerical Methods in Fluids, 1991