JYJunlian Yin

Junlian Yin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Junlian Yin has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of the Effects of Mixed-Flow Pump Inlet Structure on Pressure Pulsations and Energy Transport Characteristics

    by Guangyao Wu, Yongliang Xu, Xiaolin Shao, Yongxin Jin, Junlian Yin

    To investigate the influence of inlet structure optimization on pressure pulsation and energy transport characteristics in mixed-flow pumps, this study employed experimental and numerical calculation methods to analyze both original and optimized models. The SST-SAS turbulence model was selected for flow field computation. The experimental and numerical results showed that inlet optimization increased the head at the design condition by 1.52 m, improved the efficiency by 5.38%, and reduced the pressure pulsation amplitude by more than 90%. Analysis of energy transport term distribution characteristics within the pump revealed the mechanism behind pulsation intensity improvement: the pressure propulsion power distribution in the impeller became more stable, while the Lamb vector divergence dissipation regions and enstrophy dissipation regions substantially decreased, thereby increasing the proportion of pressure propulsion power contribution. The enhanced energy transport characteristics and improved flow field stability in the impeller region collectively optimized energy conversion performance within the impeller.

  • A new approach on radiolysis equilibrium analysis for nitrogen-water system

    by Xin Lv, Shu Li, Wentao Zhou, Junlian Yin, Qi Luo, Dezhong Wang

  • Flow characteristics of gas-containing water in shielded gaps

    by Yongxin Jin, Hong Xia, Zhirong Chang, Qingsong Liu, Jie Fu, Junlian Yin, Dezhong Wang

    This study investigated the flow characteristics of fluids within the narrow annular gap of a canned motor rotor, specifically focused on a 15-mm-wide rotor gap. By varying the inlet fluid flow rates and gas injection volumes, the formation of Taylor vortices and gas blockage phenomena under operational conditions are examined. Experimental observations confirm the emergence of Taylor–Couette flow within the annular region. Gas bubbles are entrained by the vortex structures, forming continuous helical gas bands that migrate toward the outlet. Due to buoyancy effects, phenomena such as bubble migration, gas band splitting, and recombination are observed, depending on the flow direction of the fluids. Under critical conditions, gas accumulation in the upper region of the gap leads to the onset of gas blockage, which may significantly affect flow stability and cooling performance. These results will offer a theoretical and experimental basis that serves as a foundation for optimizing the operational efficiency of canned motors.

  • Open Access

    Experimental study on modulation of homogeneous isotropic turbulence by bubbles of different sizes

    by Wuguang Chen, Guangyuan Huang, Yuchen Song, Junlian Yin, Dezhong Wang

    The mechanism of turbulence modulation by bubbles is crucial for understanding and predicting turbulent bubbly flow. In this study, we conducted an experimental investigation of turbulence modulation by bubbles of different sizes in homogeneous isotropic turbulence using two-phase stereo-particle image velocimetry measurement techniques. Two bubble generation methods, electrolysis and porous medium, were employed to generate bubbles in micrometer and millimeter sizes, respectively. The oscillating grid system was utilized to generate homogeneous isotropic turbulence, allowing precise control of turbulent boundary conditions. The ratio of the fluctuating velocities and the comparison between turbulent kinetic energy and average kinetic energy indicated that the generated turbulence was nearly homogeneous and isotropic. With increasing turbulence intensity, micron-sized bubbles transition from suppressing turbulence to enhancing it, while millimeter-sized bubbles exhibit the opposite behavior. Turbulence modulation by millimeter-sized bubbles appears to be nearly isotropic, whereas micrometer-sized bubbles do not exhibit isotropy.


  • Influence of cavitation on vortical structures and energy loss in a waterjet pump

    by Bo Gong, Chao Feng, Ning Li, Xiaoping Ouyang, Junlian Yin, Dezhong Wang

    Cavitation-induced vortex and energy loss are critical topics in the field of hydraulic machinery. Through a combination of experimental and numerical analysis, this paper investigates how blade loading affects vortical structures and energy loss during cavitation in a waterjet pump. The flow rate and cavitation conditions changed blade tip pressure loading, which significantly affected the trajectories of the primary tip leakage vortex cavitation and secondary tip leakage vortex cavitation. A considerable pressure gradient at the attached cavity closure region leads to a wall reentrant jet and a side-entrant jet, resulting in an attached vortex under the cavitation developing stage and severe stage. The development of the attached vortex leads to the shedding of attached cavities. Furthermore, the blade tip pressure difference loading significantly alters the distribution of tip leakage vortex and gives rise to a perpendicular leakage vortex (PLV). The PLV entrains the shedding cavities and forms a perpendicular cavitation vortex. These complex vortical structures induced by cavitation inevitably enhance enstrophy and lead to entropy production in the pump. The entropy production terms of viscous dissipation, turbulent dissipation, and the wall effect react differently to the development of cavitation. As the cavitation stages developed and became more severe, wall entropy production (S3) decreased. While turbulent dissipative entropy production S2 due to mixing losses occurring in the tip region increased sharply, which dominates the total entropy production S and results in an increase in S.


  • Generation of nearly homogeneous isotropic turbulence using a novel oscillating grid system

    by Guangyuan Huang, Xin Lv, Wuguang Chen, Yuchen Song, Junlian Yin, Dezhong Wang

    The creation and control of homogeneous isotropic turbulence in laboratory settings is of practical significance. In this paper, we propose a novel design for a turbulence generation apparatus driven by two pairs of oscillating grids, with the object of striking a balance between the stochastics of momentum injection and the flexibility of control of turbulent kinematic energy (TKE). To validate the performance of this system, tomographic particle image velocimetry measurements are conducted. Based on Reynolds decomposition, we characterize the secondary flow pattern and examine the impact of the mean velocity on the TKE transport. Analysis of one- and two-point statistics indicates that the generated turbulence exhibits reasonable approximations of homogeneity and isotropy. The TKE and the dissipation rate are linearly proportional to the grid oscillation frequency, with the Taylor-scale Reynolds number Reλ ranging from 47 to 154, suggesting a convenient control of turbulence with low-to-moderate intensity.


  • Open Access

    Optimization of water-jet pump based on the coupling of multi-parameter and multi-objective genetic algorithms

    by Yun Long, Tian Chenbiao, Qiang Zhuang, Zhu Rongsheng, Junlian Yin, Dezhong Wang

    As the core components of water jet propulsion system, water jet pump, directly affect the ship's propulsion performance. 3D reverse design method can effectively suppress the impeller secondary flow to get better performing hydraulic models. Aiming at fast and efficient optimization of the impellers, we parameterize the impellers and runner, and coupled with optimization algorithms and numerical calculations. It is an efficient and feasible way to coupling optimization based on multi-parameter, multi-objective and optimization algorithms, and parameterizing the impellers and guide vane geometry based on the 3D model designed by 3D reverse design method. In this paper, the waterjet propulsion pump is taken as the research object. According to the design method of the waterjet propulsion pump hydraulic model, the traditional axial flow blade design method, the modern ternary design theory of the blades, and the parametric three-dimensional reverse design method are selected to constructing an optimal design optimization strategy for the impeller of water-jet propulsion pump based on multi-parameter and multi-object genetic algorithm. Under the design conditions, the optimized pump efficiency reaches 89.28%, which is 1.24% higher than the original hydraulic model. The optimized pump head is 13.51 m, which is 0.39m more than the original hydraulic model. Under the design condition, the test measured head is 13.26m, the numerical calculation result is 1.88% higher than the test result, the test measured efficiency is 87.1%, the numerical calculation result is 2.5% higher than the test result. From the test results, the optimized impeller has higher hydraulic performance. Experiments have shown that it is feasible to optimize the design strategy.

  • Investigation of Voltage Harmonics of Dual-Armature Flux-Switching Permanent Magnet Machines

    by Jiabei Zhu, Chaoyu Jia, Dongjun Wang, Junlian Yin

    This paper investigates the voltage harmonics of dual-armature flux-switching permanent magnet (DA-FSPM) machines under load condition, with particular emphasis on the influence of stator and rotor armature reactions. Firstly, the mechanisms of the generation of even and fractional order coil voltage harmonics are investigated. It reveals that the alternate-SP-wound winding, alternate-RT-wound winding, stator winding distribution factor smaller than 1, and rotor winding distribution factor smaller than 1 cause asymmetrical armature reaction flux distributions in the DA-FSPM machines, thus additional harmonics are generated in the stator and rotor coil voltages under load condition. Furthermore, the elimination of even and fractional order harmonics in phase voltages are realized by means of selecting proper numbers of SP and RT and changing the stator and rotor coil connections. It shows that the torque ripple of the machines are reduced thanks to the reduction of voltage harmonics.