Behavior and Strength of Headed Stud–SFRCC Shear Connection. I: Experimental Study
- 1 February 2016
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 142 (2)
Abstract
The performance of a single-headed stud and group of studs embedded in steel-fiber-reinforced cementitious composites (SFRCC) were investigated by conducting push-out tests. A total of 16 specimens were tested with various parameters including diameter of studs, numbers of studs, gauge lengths, pitch lengths, and fiber volume fractions of SFRCC. The test results showed that the headed studs embedded in SFRCC ensured the failure mode of stud fracture even without using steel rebar in the slab. The studs densely arranged with the smallest pitch length permitted for installation provided more than 90% of the full shear strength of a single stud. Using nine studs densely arranged in an area allowing for only four studs in the current design code, the overall shear resistance was twice that of the conventional design. When the fiber volume fraction of SFRCC directly affects the ductility of the stud, it was found using a fiber volume fraction of 6% is most suitable.Keywords
This publication has 10 references indexed in Scilit:
- PCI JournalPCI Journal, 2016
- Parametric push-out analysis on group studs shear connector under effect of bending-induced concrete cracksJournal of Constructional Steel Research, 2013
- Development of steel beam-to-column connections using SFRCC slabsEngineering Structures, 2013
- A STUDY OF THE GROUPED ARRANGEMENTS OF STUD CONNECTORS ON SHEAR STRENGTH BEHAVIORSTRUCTURAL ENGINEERING / EARTHQUAKE ENGINEERING, 2006
- Pryout Capacity of Cast-In Headed Stud AnchorsPCI Journal, 2005
- INNOVATIONS FORUM : Engineered Cementitious Composites for Structural ApplicationsJournal of Materials in Civil Engineering, 1998
- Push-out tests on studs in high strength and normal strength concreteJournal of Constructional Steel Research, 1996
- Splitting Induced by Shear Connectors in Composite BeamsJournal of Structural Engineering, 1989
- The shear stiffness of stud shear connections in composite beamsJournal of Constructional Steel Research, 1986
- Shear Strength of Stud Connectors in Lightweight and Normal-Weight ConcreteEngineering Journal, 1971