Effect of surge voltage risetime on the insulation of low-voltage machines fed by PWM converters
Authors:
- A.M.J. SungASA.M.J. Sung
- S. BellSBS. Bell
- G.L. SkibinskiGSG.L. Skibinski
- 1 January 1998
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 34 (4) , 766-775
Abstract
This paper investigates the repetitive surge-voltage withstand of low-voltage mush-wound machines operated on adjustable-speed drives (ASDs) using insulated gate bipolar transistor (IGBT) semiconductor technology. Historical work on surge testing of motor insulation has focused on one or more of the following aspects: (1) large horsepower motors; (2) medium-voltage form-wound motors; (3) single-shot impulse-type transients; or (4) low-voltage machines with surge risetimes >200 ns. IGBT drives can have risetimes of 50-200 ns. Thus, a new study on electrical stress of insulation systems due to the nonlinear voltage distribution of mush-wound motors when subjected to repetitive steep dV/dt square-pulse waveforms (rather than impulse wave testing) is presented. Magnitude and risetime of the repetitive ASD surge-voltage transient induced on the machine terminals is reviewed first. Next, surge propagation into the winding was investigated to identify maximum voltage stress points on the conductor insulation. Potential failure mechanisms observed at these points are then discussed. The significance of decreasing surge risetime and increasing cable lengths on internal nonlinear voltage distribution is studied with experimental results from a 7.5-hp motor with a tapped stator winding.Keywords
This publication has 15 references indexed in Scilit:
- Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controlled invertersIEEE Electrical Insulation Magazine, 1996
- Implications for the application of adjustable speed drive electronics to motor stator winding insulationIEEE Electrical Insulation Magazine, 1995
- Evaluation and Testing of Turn Insulation of Large AC MotorsIEEE Transactions on Industry Applications, 1995
- Voltages to ground in load-commutated invertersIEEE Transactions on Industry Applications, 1988
- Modeling of large AC motor coils for steep-fronted surge studiesIEEE Transactions on Industry Applications, 1988
- Turn Insulation Capability of Large AC Motors Part 2 - Impulse StrengthIEEE Transactions on Energy Conversion, 1987
- Turn Insulation Capability of Large AC Motors Part 3 - Insulation CoordinationIEEE Transactions on Energy Conversion, 1987
- Turn Insulation Capability of Large AC Motors Part 1 - Surge MonitoringIEEE Transactions on Energy Conversion, 1987
- Impulse Voltage Strength of AC Rotating MachinesIEEE Transactions on Power Apparatus and Systems, 1981
- Transient Surges and Motor ProtectionIEEE Transactions on Industry Applications, 1979