Forcing Pulsations by Means of a Siren for Gas Turbine Applications
Open Access
- 13 May 2020
- journal article
- research article
- Published by MDPI AG in International Journal of Turbomachinery, Propulsion and Power
- Vol. 5 (2) , 9
Abstract
A siren is a robust fast-valve that generates effective flow pulsations and powerful noise levels under well-controlled conditions. It operates under the inlet flow conditions of a gas turbine combustor. Its principle is based on a sonic air jet periodically sheared by a cogged wheel rotating at a given speed. It is used as an alternative to loudspeakers in combustion laboratories when the use of these is made difficult by aggressive flow conditions, such as hot air under pressure, possibly containing impurities. It is also a serious candidate as an effective flow actuator to be deployed on power gas turbine fleets. The authors have gathered more than twenty years of knowledge on siren technology. This pulsator was originally developed for research on thermoacoustics. By scanning through a given frequency range, one detects the acoustic resonance of specific parts of the combustor assembly, or possibly triggers a combustion instability during a sensitivity analysis of a flame to small perturbations. In 2010, Giuliani et al. developed a novel siren model with the capacity to vary the amplitude of pulsation independently from the frequency. In this contribution, the physics, the metrics, and the resulting parameters of the pulsator are discussed. Technical solutions are unveiled about visiting large frequency ranges (currently 6 kHz) and achieving elevated pressure fluctuations (150 dB SPL proven, possibly up to 155 dB SPL) with a compact device. A multimodal excitation is available with this technology, one idea being to dissipate the acoustic energy on nearby peaks. The contribution ends with a summary of the applications performed so far and the perspective of an industrial application.Keywords
This publication has 37 references indexed in Scilit:
- Phase-Opposition Control of the Precessing Vortex Core in Turbulent Swirl Flames for Investigation of Mixing and Flame StabilityJournal of Engineering for Gas Turbines and Power, 2019
- Bistable behaviour and thermo-acoustic instability triggering in a gas turbine model combustorProceedings of the Combustion Institute, 2017
- A state-of-the-art review of pulse combustion: Principles, modeling, applications and R&D issuesRenewable and Sustainable Energy Reviews, 2016
- Liquid-Fuel Behavior in an Aeronautical Injector Submitted to Thermoacoustic InstabilitiesJournal of Propulsion and Power, 2015
- Interferometric determination of heat release rate in a pulsated flameCombustion and Flame, 2013
- Describing Function Analysis of Limit Cycles in a Multiple Flame CombustorJournal of Engineering for Gas Turbines and Power, 2011
- FEEDBACK CONTROL OF COMBUSTION OSCILLATIONSAnnual Review of Fluid Mechanics, 2005
- Acoustic Analysis of Gas Turbine CombustorsJournal of Propulsion and Power, 2003
- Scale-Up Experiments on Liquid-Fueled Active Combustion ControlJournal of Propulsion and Power, 2002
- Pulse combustionProgress in Energy and Combustion Science, 1986