A 16nm All-Digital Hardware Monitor for Evaluating Electromigration Effects in Signal Interconnects Through Bit-Error-Rate Tracking
- 4 March 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 22 (2) , 194-204
Abstract
The impact of Electromigration (EM) on the Bit-Error-Rate (BER) of signal interconnect paths was experimentally examined. An array-based test-vehicle for tracking Bit-Error-Rate (BER) degradation of signal interconnects subject to Direct-Current (DC) EM stress was implemented in a 16nm FinFET process. A unit interconnect path comprises five identical interconnect stages where each wire is driven by inverter based buffers. Accelerated EM stress testing is achieved entirely on-chip using metal heaters located directly above the devices-under-test (DUTs) and separate stress circuits driving both ends of the wire. The proposed test structure features a ring-based Voltage-Controlled-Oscillator (VCO), a bit-pattern generator and local BER sampling monitors which enable bitwise tracking of ’0’ and ’1’ errors separately, further simplifying the overall test-setup and allowing for high precision characterization of EM induced resistance shifts using only digital circuits. Measurement data collected from the 16nm prototype reveals unique insights into EM induced signal path degradation that was not available prior to this work. Our experimental studies suggest that monitoring the BER of an interconnect path could be used as a new metric for capturing EM induced resistance shifts in a real system, in lieu of the conventional approach which focuses on monitoring standalone wire resistances. Supplemental simulations showcasing the projected degradation in the interconnect path operating frequency as a function of stress time constructed from resistance traces sampled from identical wires implemented in the same process reaffirm the measurement trends.Keywords
Funding Information
- Semiconductor Research Corporation
This publication has 13 references indexed in Scilit:
- Self-heating on bulk FinFET from 14nm down to 7nm node2015
- Thermal behavior of self-heating effect in FinFET devices acting on back-end interconnects2015
- Localized thermal effect of sub-16nm FinFET technologies and its impact on circuit reliability designs and methodologies2015
- Self-heating effect in FinFETs and its impact on devices reliability characterization2014
- Electromigration Failure Distributions of Cu/Low-$k$ Dual-Damascene Vias: Impact of the Critical Current Density and a New Reliability Extrapolation MethodologyIEEE Transactions on Device and Materials Reliability, 2009
- Identification and Analysis of Dominant Electromigration Failure Modes in Copper/Low-K Dual Damascene Interconnects2006
- Evaluation of electromigration and stressmigration reliabilities of copper interconnects by a simple pulsed-current stressing technique2002
- Process design methodology for via-shape-controlled, copper dual-damascene interconnects in low-k organic film2002
- Electromigration—A brief survey and some recent resultsIEEE Transactions on Electron Devices, 1969
- The Transient Response of Damped Linear Networks with Particular Regard to Wideband AmplifiersJournal of Applied Physics, 1948