Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nakul Pande has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • On-Chip Heater Design and Control Methodology for Reliability Testing Applications Requiring Over 300°C Local Temperatures

    by Hanzhao Yu, Yong Hyeon Yi, Nakul Pande, Chris H. Kim

    This paper presents the design details and control methodologies for on-chip heaters that can provide fast and accurate local temperature control for reliability testing applications. The on-chip heater uses the Joule heating effect of a metal or poly line to heat the surrounding devices-under-test (DUT) to a target temperature as high as 300∘C. Many generations of on-chip heaters, including different heater positions, heater areas, and heater layers, have been demonstrated in technology nodes from 350nm to 16nm. To accurately operate the heater and extend the heater’s operation lifetime for long-term reliability testing, we have also developed control methodologies for precise and reliable heater control.


  • A 16nm All-Digital Hardware Monitor for Evaluating Electromigration Effects in Signal Interconnects Through Bit-Error-Rate Tracking

    by Nakul Pande, Chen Zhou, Ming-Hsien Lin, Rita Fung, Richard Wong, Shi-Jie Wen, Chris H. Kim

    The impact of Electromigration (EM) on the Bit-Error-Rate (BER) of signal interconnect paths was experimentally examined. An array-based test-vehicle for tracking Bit-Error-Rate (BER) degradation of signal interconnects subject to Direct-Current (DC) EM stress was implemented in a 16nm FinFET process. A unit interconnect path comprises five identical interconnect stages where each wire is driven by inverter based buffers. Accelerated EM stress testing is achieved entirely on-chip using metal heaters located directly above the devices-under-test (DUTs) and separate stress circuits driving both ends of the wire. The proposed test structure features a ring-based Voltage-Controlled-Oscillator (VCO), a bit-pattern generator and local BER sampling monitors which enable bitwise tracking of ’0’ and ’1’ errors separately, further simplifying the overall test-setup and allowing for high precision characterization of EM induced resistance shifts using only digital circuits. Measurement data collected from the 16nm prototype reveals unique insights into EM induced signal path degradation that was not available prior to this work. Our experimental studies suggest that monitoring the BER of an interconnect path could be used as a new metric for capturing EM induced resistance shifts in a real system, in lieu of the conventional approach which focuses on monitoring standalone wire resistances. Supplemental simulations showcasing the projected degradation in the interconnect path operating frequency as a function of stress time constructed from resistance traces sampled from identical wires implemented in the same process reaffirm the measurement trends.


  • Neutron-Induced Pulsewidth Distribution of Logic Gates Characterized Using a Pulse Shrinking Chain-Based Test Structure

    by Nakul Pande, Saurabh Kumar, Luke R. Everson, Gyusung Park, Ibrahim Ahmed, Chris H. Kim

    This work presents measured data showcasing neutron-radiation induced Single Event Transient (SET) pulse widths in distinct standard logic gate types, together with a detailed analysis on the choice of design parameters impacting the corresponding sampled pulse width distributions. The SET pulse width distributions are obtained from a high density, array-based characterization-vehicle, implemented in 65nm planar CMOS and 16nm FinFET processes, featuring a tunable, high resolution pulse-shrinking chain together with a closely embedded sampling circuit to avoid width distortion effects. The proposed macro employs standard logic gate-chains in varying lengths, threshold voltages (VTH) and transistor width flavors as the Devices-Under-Test (DUTs). Measured irradiation data for a range of operating voltages from nominal down to near-threshold reveals the relative impact of the chosen design parameters such as VDD, VTH, device width and the logic chain length as well as their interplay, impacting the overall soft-error susceptibility and the sampled pulse width distributions among the different standard gate types.


  • GeNVoM: Read Mapping Near Non-Volatile Memory

    by S. Karen Khatamifard, Zamshed Chowdhury, Nakul Pande, Meisam Razaviyayn, Chris H. Kim, Ulya R. Karpuzcu

    DNA sequencing is the physical/biochemical process of identifying the location of the four bases (Adenine, Guanine, Cytosine, Thymine) in a DNA strand. As semiconductor technology revolutionized computing, modern DNA sequencing technology (termed Next Generation Sequenc-ing, NGS) revolutionized genomic research. As a result, modern NGS platforms can sequence hundreds of millions of short DNA fragments in parallel. The sequenced DNA fragments, representing the output of NGS platforms, are termed reads. Besides genomic variations, NGS imperfections induce noise in reads. Mapping each read to (the most similar portion of) a reference genome of the same species, i.e., read mapping, is a common critical first step in a diverse set of emerging bioinformatics applications. Mapping represents a search-heavy memory-intensive similarity matching problem, therefore, can greatly benefit from near-memory processing. Intuition suggests using fast associative search enabled by Ternary Content Addressable Memory (TCAM) by construction. However, the excessive energy consumption and lack of support for similarity matching (under NGS and genomic variation induced noise) renders direct application of TCAM infeasible, irrespective of volatility, where only non-volatile TCAM can accommodate the large memory footprint in an area-efficient way. This paper introduces GeNVoM, a scalable, energy-efficient and high-throughput solution. Instead of optimizing an algorithm developed for general-purpose computers or GPUs, GeNVoM rethinks the algorithm and non-volatile TCAM-based accelerator design together from the ground up. Thereby GeNVoM can improve the throughput by up to 3.67x; the energy consumption, by up to 1.36x, when compared to an ASIC baseline, which represents one of the highest-throughput implementations known.


  • An Energy-Efficient One-Shot Time-Based Neural Network Accelerator Employing Dynamic Threshold Error Correction in 65 nm

    by Luke R. Everson, Muqing Liu, Nakul Pande, Chris H. Kim

    As neural networks continue to infiltrate diverse application domains, computing will begin to move out of the cloud and onto edge devices necessitating fast, reliable, and low-power (LP) solutions. To meet these requirements, we propose a time-domain core using one-shot delay measurements and a lightweight post-processing technique, dynamic threshold error correction (DTEC). This design differs from traditional digital implementations in that it uses the delay accumulated through a simple inverter chain distributed through an SRAM array to intrinsically compute resource intensive multiply-accumulate (MAC) operations. Implemented in 65-nm LP CMOS, we achieve an energy efficiency of 104.8 TOp/s/W at 0.7-V with 3b resolution for 19.1 fJ/MAC.