Influence of the multiplication layer on the long-wavelength InAsSb avalanche photodiodes performance
Open Access
- 8 September 2025
- journal article
- Published by Polish Academy of Sciences Chancellery in Opto-Electronics Review
- p. 155676
Abstract
The paper analyses the performance of avalanche barrier infrared detectors based on the bulk InAsSb ternary compound of AIII-BV materials, lattice-matched to the GaSb substrate for a long-wavelength range operating at thermoelectric cooling conditions. A ternary Al0.2As0.8Sb barrier was assumed. Particular attention was paid to the influence of avalanche multiplication layer parameters on the device current-voltage characteristics and current gain. Numerical simulations were performed using a SimuApsys software for the npBp InAsSb detector operating at the temperature achieved by a two-stage thermoelectric cooler (TE), T = 230 K. Based on the analysis of the literature data of the avalanche ionisation coefficient and the density of the band-to-band tunnelling currents, the conditions in which the Zener effect does not reduce the multiplication process were determined. The highest gain can be achieved with a low level of multiplication layer doping and a lower molar composition of antimony compared to the absorber composition (larger band gap energy). The gain also increases with the multiplication of layer thickness. The paper discusses the design of the long-wavelength avalanche detectors based on InAsSb with an optimised multiplication process.Keywords
This publication has 20 references indexed in Scilit:
- Infrared avalanche photodiodes from bulk to 2D materialsLight: Science & Applications, 2023
- Design and modeling of high-performance mid-wave infrared InAsSb-based nBn photodetector using barrier band engineering approachesFrontiers of Optoelectronics, 2023
- High-Temperature Characteristics of an InAsSb/AlAsSb n+Bn DetectorJournal of Electronic Materials, 2016
- Development of Bulk InAsSb Alloys and Barrier Heterostructures for Long-Wave Infrared DetectorsJournal of Electronic Materials, 2015
- Room temperature performance of mid-wavelength infrared InAsSb nBn detectorsApplied Physics Letters, 2014
- Mid-infrared InAs0.79Sb0.21-based nBn photodetectors with Al0.9Ga0.2As0.1Sb0.9 barrier layers, and comparisons with InAs0.87Sb0.13 p-i-n diodes, both grown on GaAs using interfacial misfit arraysApplied Physics Letters, 2013
- InAs/InAsSb Avalanche Photodiode (APD) for applicaions in long-wavelength infrared regionOptoelectronics Letters, 2008
- n B n detector, an infrared detector with reduced dark current and higher operating temperatureApplied Physics Letters, 2006
- Band parameters for III–V compound semiconductors and their alloysJournal of Applied Physics, 2001
- InAs1−xSbx infrared detectorsProgress in Quantum Electronics, 1989