Controllable rectification on the irreversible strain limit of 2G HTS coated conductors
- 25 November 2021
- journal article
- research article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 35 (1) , 015003
Abstract
The second generation high-temperature superconducting coated conductors (CCs) have excellent electrical and mechanical properties, and are extensively used in superconducting devices such as fault current limiters, magnets and motors. During the operation of these superconducting devices, superconducting CCs inevitably bear the combination of electromagnetic force and thermal mismatch stress, resulting in straining of YBa2Cu3O7− δ (YBCO) layer along the tape length. It is well known that the strains of superconducting CCs cause degradation of critical current (I c). Generally, the irreversible strain limit ( ε irr ) is used to characterize the phenomenon that I c of superconducting CCs degrades with axial strain. When the axial strain of superconducting CCs is less than ε irr , I c can be reversibly recovered by over 99% after being unloaded. Therefore, ε irr is a key parameter for the design and application of superconducting CC devices. For this reason, to carry out a practical engineering method for improving ε irr of superconducting CCs has become a challenge and aroused interests among researchers. This study is based on the idea of precompression. A 316LN stainless steel tape was pretensioned at 77 K to improve its elastic strain limit. Then, two superconducting CCs were soldered onto both surfaces of pretensioned stainless steel tape respectively. As a result, ε irr of the superconducting CCs can be controlled manually with different precompressions. Taking YBCO CCs produced by SuperPower Inc. as an example, the measurement results show that the ε irr of the YBCO CCs increased from 0.39% to 0.73%. Meanwhile, the thickness of the sample did not increase more than once.Keywords
Funding Information
- National Natural Science Foundation of China (11872196)
This publication has 26 references indexed in Scilit:
- Characterization of transverse tensile stress response of critical current and delamination behaviour in GdBCO coated conductor tapes by anvil testSuperconductor Science and Technology, 2013
- Intrinsic strain effect on critical current in Cu-stabilized GdBCO coated conductor tapes with different substratesSuperconductor Science and Technology, 2013
- The reversible strain effect on critical current over a wide range of temperatures and magnetic fields for YBCO coated conductorsSuperconductor Science and Technology, 2010
- Effect of strain, magnetic field and field angle on the critical current density of Y Ba2Cu3O7−δcoated conductorsSuperconductor Science and Technology, 2010
- Superconducting fault current limiter using high-resistive YBCO tapesPhysica C: Superconductivity and its Applications, 2008
- Dependence of the critical current of YBa2Cu3O7−δcoated conductors on in-plane bendingSuperconductor Science and Technology, 2008
- Delamination strength of YBCO coated conductors under transverse tensile stressSuperconductor Science and Technology, 2007
- Reversible Strain Dependence of Critical Current in 100 A Class Coated ConductorsIEEE Transactions on Applied Superconductivity, 2005
- 6.6 kV Resistive Superconducting Fault Current Limiter Based on YBCO FilmsIEEE Transactions on Applied Superconductivity, 2005
- Application studies of superconducting fault current limiters in electric power systemsIEEE Transactions on Applied Superconductivity, 2002