Elastocaloric effect characterization of a NiTi tube to be applied in a compressive cooler
Open Access
- 1 December 2022
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 12 (12) , 125202
Abstract
In this article, the elastocaloric effect of a commercial superelastic NiTi shape memory alloy (SMA) tube (with an outer diameter of 5 mm and wall thickness of 1 mm) to be applied in a compressive cooler was measured and analyzed. The elastocaloric effect of the tube was measured vs the applied strain and strain rate. The largest temperature changes of 21 K during loading and 16 K during unloading were measured at an applied strain of 3.30% and strain rate of 0.33 s−1. In the fatigue testing of the sample, only 0.20% of the residual strain accumulated after a runout of 1 × 106 sinusoidal force-controlled loading–unloading cycles at a maximum compressive stress of 1100 MPa and frequency of 20 Hz. Numerical results of the cooling characteristics of a compressive device using a single NiTi tube with the above-mentioned cross section and an aspect ratio of 60:1 as the refrigerant showed that the device could produce a total cooling power of up to 20 W and a coefficient of performance of up to 6.5. The results of this article demonstrate that superelastic NiTi SMA tubes of suitable wall thickness and aspect ratios are good candidates to be applied in a compressive elastocaloric cooler.Keywords
Funding Information
- IER Foundation 2020 (IERF202003)
- National Natural Science Foundation of China (52206224)
- Hong Kong Research Grant Council (16206119)
- Science, Technology and Innovation Commission of Shenzhen Municipality (SGDX2019081623360564)
- Project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone (HZQB-KCZYB-2020083)
- Shenzhen Basic Research Project (JCYJ20210324120001003, JCYJ20200109144608205)
This publication has 71 references indexed in Scilit:
- Scientific test setup for investigation of shape memory alloy based elastocaloric cooling processesInternational Journal of Refrigeration, 2015
- A review of membrane contactors applied in absorption refrigeration systemsRenewable and Sustainable Energy Reviews, 2015
- A review of thermoelectric cooling: Materials, modeling and applicationsApplied Thermal Engineering, 2014
- Tension, compression, and bending of superelastic shape memory alloy tubesJournal of the Mechanics and Physics of Solids, 2014
- Demonstration of high efficiency elastocaloric cooling with large ΔT using NiTi wiresApplied Physics Letters, 2012
- Dynamic operation of an active magnetic regenerator (AMR): Numerical optimization of a packed-bed AMRInternational Journal of Refrigeration, 2011
- The next generation of refrigerants – Historical review, considerations, and outlookInternational Journal of Refrigeration, 2008
- Magnetocaloric effect and magnetic refrigerationJournal of Magnetism and Magnetic Materials, 1999
- On the nucleation and propagation of phase transformation fronts in a NiTi alloyActa Materialia, 1997
- Thermomechanical aspects of NiTiJournal of the Mechanics and Physics of Solids, 1995